A "what's interesting about your job" thread
#1
Administrator
Thread Starter
A "what's interesting about your job" thread
What about you job is interesting?
I work at a nuke plant with dual units putting out 860 Mw to the grid. We have six 6000 HP reactor coolant pump motors running all the time moving 88,000 gpm of reactor coolant at 2235 psi and about 560 degrees, eight 2000 HP motors moving 210,000 gpm of river water, four 7000 hp tandem motor single stage double suction pumps putting out a lot at about 1250 psi, six transformers each as big as a house, and over 600 tons of steel spinning from one end of the rotors to the end of the generator just for starters. We have three EMD 20 cylinder diesels as back up power and a 3612 Cat for loss of off site power (back up the the back up). The containment is held at 9.5 psi which makes for an interesting work area (gotta wear bottles to go in).
What about your job is kinda neat like this?
I work at a nuke plant with dual units putting out 860 Mw to the grid. We have six 6000 HP reactor coolant pump motors running all the time moving 88,000 gpm of reactor coolant at 2235 psi and about 560 degrees, eight 2000 HP motors moving 210,000 gpm of river water, four 7000 hp tandem motor single stage double suction pumps putting out a lot at about 1250 psi, six transformers each as big as a house, and over 600 tons of steel spinning from one end of the rotors to the end of the generator just for starters. We have three EMD 20 cylinder diesels as back up power and a 3612 Cat for loss of off site power (back up the the back up). The containment is held at 9.5 psi which makes for an interesting work area (gotta wear bottles to go in).
What about your job is kinda neat like this?
#3
Registered User
Join Date: Mar 2004
Location: Massachusetts
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
What about you job is interesting?
I work at a nuke plant with dual units putting out 860 Mw to the grid. We have six 6000 HP reactor coolant pump motors running all the time moving 88,000 gpm of reactor coolant at 2235 psi and about 560 degrees, eight 2000 HP motors moving 210,000 gpm of river water, four 7000 hp tandem motor single stage double suction pumps putting out a lot at about 1250 psi, six transformers each as big as a house, and over 600 tons of steel spinning from one end of the rotors to the end of the generator just for starters. We have three EMD 20 cylinder diesels as back up power and a 3612 Cat for loss of off site power (back up the the back up). The containment is held at 9.5 psi which makes for an interesting work area (gotta wear bottles to go in).
What about your job is kinda neat like this?
I work at a nuke plant with dual units putting out 860 Mw to the grid. We have six 6000 HP reactor coolant pump motors running all the time moving 88,000 gpm of reactor coolant at 2235 psi and about 560 degrees, eight 2000 HP motors moving 210,000 gpm of river water, four 7000 hp tandem motor single stage double suction pumps putting out a lot at about 1250 psi, six transformers each as big as a house, and over 600 tons of steel spinning from one end of the rotors to the end of the generator just for starters. We have three EMD 20 cylinder diesels as back up power and a 3612 Cat for loss of off site power (back up the the back up). The containment is held at 9.5 psi which makes for an interesting work area (gotta wear bottles to go in).
What about your job is kinda neat like this?
I'm a software engineer and I enjoy my job most of the time.
But, like you a few firends of mine work at the Seabrook nuke plant in Seabrook NH.
From what they've told me, what nuke plants do is flash heat huge, and I mean HUGE quantities of water very fast, which turns it into steam, which is then used to turn huge generator turbines and generate electricity.
Pretty impressive. I wouldn't mind working there.
They are techs and make great money and work all the OT they want.
Good benefits too.
DT.
#6
Administrator / Scooter Bum
The most interesting thing about my job is how folks can spend months and months pouring over information, diagrams, and specifications on a project to make sure it's "Just Right", Put it out to bid, Look over the bids, Award the contract to build it.........
then change their mind when you're half way done and want something totally different.
I'm repetedly told, "You're not part of the Technical Solution Group"
But then I have to figure out how to make their silly plan actually work.
Two Words.........
Job Security.....
then change their mind when you're half way done and want something totally different.
I'm repetedly told, "You're not part of the Technical Solution Group"
But then I have to figure out how to make their silly plan actually work.
Two Words.........
Job Security.....
#7
Registered User
Join Date: Jul 2004
Location: Frostburg Md.
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
My Job is pretty dull. I work for the Federal Bureau of prisons. I am a Powerhouse Operator. I work at a penitentiary and get listen to the do-do hitting the fan inside the fence every day. I'm glad I no longer have to put up with that. Not many days go by without some inmate either getting stabbed by another inmate or an inmate getting gassed in his cell by staff.
Either way, it makes for some intertainment...
Either way, it makes for some intertainment...
Trending Topics
#8
Registered User
Join Date: Sep 2005
Location: North East Montana
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
The most interesting thing about my job is how folks can spend months and months pouring over information, diagrams, and specifications on a project to make sure it's "Just Right", Put it out to bid, Look over the bids, Award the contract to build it....then change their mind when you're half way done and want something toatally different.
#9
Administrator / Scooter Bum
#10
Registered User
I work with Dieseldude4x4. I run any of four engine lathes from 13.5 inch swing to 32 inches x 168 inches and 40 horsepower. Two milling machines, one is a bridgeport style 3 hp. the other is a 15 horse Kearney and Trecker universal mill and a radial drill press that weights 18,500 pounds. Then the assorted small grinders, belt sanders, surface grinder, key seater, hydraulic press, etc. It gives me great satisfaction to take a piece of raw stock and make something useful or take one of the interchangable parts that won't and make them work. Our plant stared up in 1972/1973. The machine shop equipment was bought in 1970. I have been here since 1973. There are only three people here including myself that do what I do for a living. Two of us are retiring with in the next 18 months.
#11
Registered User
Join Date: Apr 2004
Location: St.Paul , MN
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
To answer the question:
Got laid off again. Promised the moon and never made it to orbit.
Shovehead, you got that right. unfortunately the bottom indian (no offense) can't say "I told you it wouldn't work that way". Instead you are instructed to change the laws of physics. We haven't made contact smart extraterrestrials yet so we don't have that ability.
Got laid off again. Promised the moon and never made it to orbit.
Shovehead, you got that right. unfortunately the bottom indian (no offense) can't say "I told you it wouldn't work that way". Instead you are instructed to change the laws of physics. We haven't made contact smart extraterrestrials yet so we don't have that ability.
#12
Registered User
Join Date: Jul 2004
Location: NEW YORK
Posts: 668
Likes: 0
Received 0 Likes
on
0 Posts
My current job, not too much to write about. In my history, I used to manually climb radio towers. Tallest tower climbed was over five hundred feet. Just me, a climb harness and some steel shank boots. Unfortunately, there have been a large amount of deaths related to climbing radio towers.
#14
Registered User
Join Date: Sep 2003
Location: Southern Utah
Posts: 910
Likes: 0
Received 0 Likes
on
0 Posts
I'm the NCOIC of Elmendorf AFB's Combat Arms section. We run all weapons training for the base from M9 pistol up to the M2 .50 cal MG and everything in between. We also perform all sub-depot weapon repairs and inspections. Good job, if your a gun nut like me...
#15
Registered User
Join Date: Aug 2006
Location: Cresson/Stephenville Texas
Posts: 2,436
Likes: 0
Received 0 Likes
on
0 Posts
I work on a 3k acre ranch, and have a total of 9 diesels, including pickups, mowers, and tractors (23,31,75,116,125hp) that I have the priveledge of operating day in and day out. Plus 120 cows and 20 horses to take care of.