Random Picture Thread
#1
Registered User
Thread Starter
Join Date: Jan 2012
Location: Redding,Ca
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Random Picture Thread
I'll start with a pic of my rig next to a Cessna 421C that I was working on in 100 degree heat on black asphalt.....It was a miserable place to repair it Post anything ya want within the forum rules of course. Kid
#3
DTR's Volcano Monitor, Toilet Smuggler, Taser tester, Meteorite enumerator, Quill counter, Match hoarder, Panic Dance Choreographer, Bet losing shrew murderer
Join Date: May 2007
Location: Kenai Alaska
Posts: 965
Likes: 0
Received 0 Likes
on
0 Posts
My rig on the back side of Valley of Fire park in NV.
#5
DTR's Volcano Monitor, Toilet Smuggler, Taser tester, Meteorite enumerator, Quill counter, Match hoarder, Panic Dance Choreographer, Bet losing shrew murderer
Join Date: May 2007
Location: Kenai Alaska
Posts: 965
Likes: 0
Received 0 Likes
on
0 Posts
I was Lary's fault that I posted a pic of the truck.
#6
I grad-u-ated frum Claudes skool of tpying....
one of my other rides ....i forget what year but as i recall.. this is crowns phototype engine from the 50's.... so this is the grandaddy of crown locos
Trending Topics
#10
DTR's Volcano Monitor, Toilet Smuggler, Taser tester, Meteorite enumerator, Quill counter, Match hoarder, Panic Dance Choreographer, Bet losing shrew murderer
Join Date: May 2007
Location: Kenai Alaska
Posts: 965
Likes: 0
Received 0 Likes
on
0 Posts
#11
I grad-u-ated frum Claudes skool of tpying....
bark .crown was just one of three compeney i know of that made those ...the pic above is Lil Toot from Rough an Tumble Kinzers pa... Iv also worked on a Chance loco.... this photo was taken while i worked at the place fighting to keep the bugger starting every morning
https://encrypted-tbn1.google.com/im...1KZK0Kx7EqB3mz
https://encrypted-tbn3.google.com/im...gUuzKPiFXrUhz_
the third co was...crap now i cant remember it ....ill post it up when i do.... iv also been farting around with a Henschel 0-4-0 24" gouge
https://encrypted-tbn2.google.com/im...7ImPZSwjcwRPsA
https://encrypted-tbn1.google.com/im...1KZK0Kx7EqB3mz
https://encrypted-tbn3.google.com/im...gUuzKPiFXrUhz_
the third co was...crap now i cant remember it ....ill post it up when i do.... iv also been farting around with a Henschel 0-4-0 24" gouge
https://encrypted-tbn2.google.com/im...7ImPZSwjcwRPsA
#13
I grad-u-ated frum Claudes skool of tpying....
ehh just some of the heavy iron iv played with .... iv got to get going on the henschel..its been sitting for 10 years now in a three sided shed...... when i was 18 or so i did the math an figured out i had 10 -13 years experance playing with old steamers trains an tractors and portable power setups.... im 22 now so around 16 years experance now...crazy huh?....anyways ..from what i can tell the henschel is a 1935 imported from germany after WW2 so it was likly invovled with the **** death trains i figure...in some form or another...i cant prove it yet though