Other Everything else not covered in the main topics goes here. Please avoid brand and flame wars. Don't try and up your post count. It won't work in here.

Ergonomics - future Ram?

Thread Tools
 
Search this Thread
 
Old Mar 12, 2004 | 08:23 AM
  #16  
LonCray's Avatar
Registered User
 
Joined: Aug 2002
Posts: 77
Likes: 0
From: Manassas, Virginia
Only problem I have is I'd like the ashtray to not be right where I put my knee - I keep having to reach down to close the darned thing after my knee popped it open. Otherwise, any ergonomic problems I might have with my truck are quickly forgotten once I push the go pedal!
Reply
Old Mar 12, 2004 | 09:48 AM
  #17  
TomW's Avatar
Registered User
 
Joined: Nov 2003
Posts: 413
Likes: 0
From: Where my hat is
Thing that bugs me, especially in rush hour traffic downtown is that huge blind spot created by the door frame and post at the windshield. Pretty large area to hide stuff behind.
Reply
Old Mar 13, 2004 | 08:11 AM
  #18  
papaduck's Avatar
Registered User
 
Joined: Mar 2003
Posts: 783
Likes: 0
From: NW Arkansas
Originally posted by Beavermike
[/B]
My biggest beef on this rig is the seats. After an hour or two in the saddle my buns hurt. I only weight 180, maybe I don't have enough padding . I'm sitting right on the metal support brackets under the seats. It needs more padding or something really bad. [/B]
When I took delivery of my '03 I had the same problem. After making a 200 mile trip with only 1000 miles on the OD I was squirming all over the seat. Couldn't get off of the frame. I was hurting on the retrun trip. Went straight to the dealer, did not go home, about the problem.

I was first sent to an uphostery shop, where we tried more padding, this caused other problems. Different approches were tried but each created other problems, such as if you sit to high the head support would hit me the shoulders, had to turn it around. The dealer agreed to help me any way I wanted. Tried to get after market seats, none available from any of the after market manufacturers.

The seats on my '97 were perfect for me and the wife. I'm 6 ft., 225 lb. wife is 5' 4" and a lot lighter.

The dealer had a couple of '02 3500 with out the bed and the seats were like the ones in my '97. He agreed to change out the seats if they would fit. They would not, different mounting. He gave me the seats anyway and I had to make a mounting plate and got them to fit, he couldn't do this because of safety issues.

The seats do not match perfectly, but noone notices until I mention it. Boy what a great imporvement. I still have the orginal seats if I ever decide to trade.

I can't thank my dealer enough. He really went out of his way to help me with this MAJOR problem. He even installed my 5er hitch for free because of the seat problem.
Reply
Old Mar 13, 2004 | 08:53 AM
  #19  
propinc's Avatar
Registered User
 
Joined: May 2003
Posts: 118
Likes: 0
From: Arizona
papaduck
Boy I find it hard to believe a "Dealer" did all that for you ... better keep him!!
Reply
Old Mar 13, 2004 | 01:44 PM
  #20  
papaduck's Avatar
Registered User
 
Joined: Mar 2003
Posts: 783
Likes: 0
From: NW Arkansas
I do plan to keep him. I got a good trade on the '03. Hadn't even considered trading the '97, had it in to service the auto-tranny. Made me such a good deal and I needed the quad cab, couldn't turn it down. I had purchased my last 3 vehicles from this dealer.

This is not the first time that I had problems with Dodge seats, but this is the only time the problem was resolved to my satisfaction (other dealers). I thought that Dodge had finally got the message on the seats because the seats in the '97 were perfect and I didn't expect to have a problem in the '03.

It was easy to install the '02 seats.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DiEseLjunKy
Suggestions, Comments and Site Questions
2
Oct 5, 2007 08:56 PM
mikelr
3rd Generation Ram - Non Drivetrain - All Years
9
Jan 30, 2007 01:07 PM
dodgeboy59td
Performance and Accessories 2nd gen only
29
May 5, 2003 05:16 PM
Commatoze
Other
3
Jan 17, 2003 03:57 PM




All times are GMT -5. The time now is 12:07 AM.