LakeTex,

Good deal, hope to see you there.

PS, I hope the problem is with the Chevy part and not the Cummins part.

 

crobtex, BigBlueDodge will be there at a minimum. He may be bringing up to 3 of his Ferd buddies as well if they can get off work. All will be dyno'ing if coming.

 

And oh yeah, this looks to have a pretty good turn out. I've been reading on both the Chebby and Ferd boards and this is getting alot of attention, especially from the Chebby boys. I want to see at least one 600+ hp truck before I leave. And oh yeah, you'll know me because I'll be the one with camera and video camera in hand. Plan on getting some videos of everyone.

 

I'll be there...

Looks like a good turnout. This should be just like the old days when it was Speedworks.

 

AggieJustin, BigBlueDodge

Great, glad you both are going to make it.

If Jim Fulmer shows, you get to see a: 98, 12V, TST #6 plate, 793 HP

 

Yea Ill definetly be there to. Probably bring a few ferd boys who think that their trucks got some power.

 

Forgive me if I can't remember "real" names. I think I know some them, but I'd rather leave them off the get them wrong.

So far, I have a pretty good idea of who will show from DTR.
If my tired old memory left you out, let me know.

Bryan
Cody
Rowland
Dan
Tyler
Hunter
John Rodriguez
Jeremy (dig'umz)
Joseph
Mike (gunrunner1)
Rob (hotdram)
Robert (TexasCTD)
2k1yzfr1
fordsux8269
Big Blue Dodge
AggieJustin

Others: Haven't heard from in awhile.....
James "loch"
"sho_shane"
"Tmc243"
"LakeTex"
"BBWD"

???????
Don M

 

I got me a new job! I am the newest Diesel Mechanic for John Deere up here in Gainesville. BAD thing is that i work untill 3PM on Sat.....Are people going to hang around that late (Or later?)....if so...i will come definatly! I can make it around 4ish. Let me know....please!

 

Happy about your new job.....sad about Saturday.

It's suppose to last until 8:00 pm, but I don't know who will still be there.

 

Hhmm... Don't let those guys pick on you too much... I know some of the guys in the shop... Bill.. (Mr. Moline) ask him about pulling his ProStock Alky Minnie Mo...

There will still be people there at 4.. and probably much later.. as there are going to be a ton of people there... Just look at the list from this One website... there will be a crowd of Cheby's and Furds....

 

Well....half of it is minor Getrag probs, and half is needing a new steering column. Hopefully I can get time to resolve both problems next week.

 

I may be wrong, but I think close parking is going to be a preimum. I will be there early and try to park on the opposite end of the strip from HPP. There may room for those of you that get there early enough.

If this don't work, there are some trees next to HPP and an empty lot that I think we can park on. (dirt and gravel) WHAT! My clean truck! I can't believe I'm even suggesting to park on dirt and gravel.

 

UPDATE....

Posted by Cody:
I wasnt aware of this until tonight, but the dyno isnt first come first serve. If you want a spot you need to contact Micah who is running the thing. I know charlie mentioned his name earlier in this thread. I reserved 3 spots for 12:00, 12:20, and 12:40 for myself, Bryan and Aaron or someone else if he doesnt show. I would of reserved more, but I have no idea on an exact headcount and there are always 1 or 2 people who crawfish out of a meeting at the last minute. Charlie or myself has the guy's phone #, but I would probably try to reserve a spot before I make the drive for nothing.

This is the first I've heard about this. I have a call in to Micah to find out what the deal is.....

 

Well, now, there IS a list.
If you want to be sure and get on the dyno, you need to call Micah at 214-682-2299. He said it wasn't really necessary unless you wanted to be guaranteed a spot.

 

Due to the overwhelming response and for those coming in from out of town, we started a “call ahead “ list. We want everyone to have an opportunity to run, however it is not necessary to be on the “list” to run. We are starting at 8:00am and there are plenty of open times available.

thanks,
Micah
outlawdra@hotmail.com