Texas Dyno Day...
Thread Starter
Registered User
Joined: Jun 2002
Posts: 463
Likes: 0
From: McKinney, Texas
Texas Dyno Day...
Here we go again boys....
Who's showing? 
Ok the date is set in stone Saturday March 13th 9-6,the event will be held at Turbochargers.com 290 & Pinemont.They have a Dynojet 248c that will read torque.3 pulls 50.00-10.00 a pull thereafter.A printout will be available or bring a floppydisc so you can post it on the net.
Check back often for any changes or info that occur.
PS We are looking for someone to BBQ.
Directions.From Beltway 8 and 290 head southeast on 290 and take Pinemont exit stay on feeder go under Pinemont to 43rd and U-turn heading back Northwest on feeder,just as you go under Pinemont there is an exit to the right which will take you behind the Mustang equipment building, Turbochargers.com will be on the righthand side.From downtown take 290 Northwest to the 43rd exit and follow above directions.
http://www.turbochargers.com/
Turbochargers.com
5410 Burr Oak Drive
Houston, Texas 77092
(713) 681-1111
Check back often for any changes or info that occur.
PS We are looking for someone to BBQ.
Directions.From Beltway 8 and 290 head southeast on 290 and take Pinemont exit stay on feeder go under Pinemont to 43rd and U-turn heading back Northwest on feeder,just as you go under Pinemont there is an exit to the right which will take you behind the Mustang equipment building, Turbochargers.com will be on the righthand side.From downtown take 290 Northwest to the 43rd exit and follow above directions.
http://www.turbochargers.com/
Turbochargers.com
5410 Burr Oak Drive
Houston, Texas 77092
(713) 681-1111
Registered User
Joined: Dec 2002
Posts: 457
Likes: 0
Count me in!!! Ive been lookin' for a chance to get her on the spinner for a while now. Nice timing too, Thats the first saturday of Spring break around here Are there any other activities planned? Giveaways
?
Scott
Are there any other activities planned? Giveaways ?Scott
Trending Topics
Registered User
Joined: Oct 2003
Posts: 0
Likes: 0
It's a possibility.I'm afraid David might commit suicide if he see's my truck.
Never been to a dyno event,kinda curios what I would lay down.People on the TDR are trying to figure my HP,its not near what they think.
Never been to a dyno event,kinda curios what I would lay down.People on the TDR are trying to figure my HP,its not near what they think.
Thread Starter
Registered User
Joined: Jun 2002
Posts: 463
Likes: 0
From: McKinney, Texas
Originally posted by Battering Ram
Well I'm gonna try to make it down as early as possible and get on the rollers quickly... I will be on my way to Alabama.
Horace
Well I'm gonna try to make it down as early as possible and get on the rollers quickly... I will be on my way to Alabama.
Horace
I saw that thread, kind of got a laugh out of it myself, but I'm not one to start fights on the internet.
Horace,
Alabama? Heck I'm on the way to Florida that day, or the day before!
. Im looking forward to meeting some of you guys finally.
Registered User
Joined: Feb 2003
Posts: 1,123
Likes: 0
From: Laredo, Tx, 7 hours south of Dallas
Scott,
Your PM box is full, so,,,
How do you like those gapless rings and where did you get them?
I want to put them on my 12V.
feel free to give me a call.
(956) 740-4015
Oh yah, BTW,, I'm going to try and be there with my 24V that hasn't been properly on the road since July, and it's coming back with a vengance
Merrick
Your PM box is full, so,,,
How do you like those gapless rings and where did you get them?
I want to put them on my 12V.
feel free to give me a call.
(956) 740-4015
Oh yah, BTW,, I'm going to try and be there with my 24V that hasn't been properly on the road since July, and it's coming back with a vengance
Merrick
Registered User
Joined: Dec 2002
Posts: 457
Likes: 0
Merrick,
I got the gapless rings from Total Seal. I believe their website is www.totalseal.com. Id say that they are one of the better mods Ive done and definately the most cost efficient . The engine noise decreased DRAMATICALLY (comperable to the 3rd gens) They eliminated all of my blowby and there is a noticeable increase in power. The customer service over there is great too. I shipped my second compression rings out on Monday and they cut the grooves and sent them back to me on Tuesday (I did pay for next day air though
) . Give em a call and tell them you want to convert your 2nd compression rings to "gapless." I believe the cost is ~6 bucks per ring. Let me know if you have any more questions and Ill try to clean out my mailbox
.
Scott
BTW: It would be great to see you at the dyno day.... note to self another vehicle will be there to put mine to shame .
I got the gapless rings from Total Seal. I believe their website is www.totalseal.com. Id say that they are one of the better mods Ive done and definately the most cost efficient
. The engine noise decreased DRAMATICALLY (comperable to the 3rd gens) They eliminated all of my blowby and there is a noticeable increase in power. The customer service over there is great too. I shipped my second compression rings out on Monday and they cut the grooves and sent them back to me on Tuesday (I did pay for next day air though ) . Give em a call and tell them you want to convert your 2nd compression rings to "gapless." I believe the cost is ~6 bucks per ring. Let me know if you have any more questions and Ill try to clean out my mailbox .Scott
BTW: It would be great to see you at the dyno day.... note to self another vehicle will be there to put mine to shame
.
Thread
Thread Starter
Forum
Replies
Last Post
rdnckhauss
Competition / Pulls / OffRoad
29
Apr 17, 2008 09:42 PM