anybody know of one around?
#1
anybody know of one around?
hey i'm thinking about getting a mega cab and wondered if anyone has or know anyone who has a mega cab converted to a long bed in the state of missouri? i wouldnt mind at least getting a look at one before i make any decisions. thanks
#4
Registered User
Join Date: Aug 2007
Location: harrison arkansas
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
http://www.megacablongbed.com/
thats the web they are in texas
thats the web they are in texas
#5
yea ive heard about the place in texas but im unsure of where they cut the frame. ive been doing some research and found there seems to be 2 ways of doing the stretch. some places cut the frame right below the rear of the cab which some say will cause sag. the others cut between the rear spring mounts and say they dont have to really move any mounts that way. as far as the turning radius a while back i think it was diesel tech magazine had this in there
base turn radius
ford-56.5
gm-55.1
stock mega-52.5
long bed mega-54.8
mainly i just want to see one in person before i find a truck and have the conversion done out of state then get the truck and am unhappy with it.
base turn radius
ford-56.5
gm-55.1
stock mega-52.5
long bed mega-54.8
mainly i just want to see one in person before i find a truck and have the conversion done out of state then get the truck and am unhappy with it.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
winkdemon
ABDTR #5
8
01-19-2012 09:50 AM
BigWaylon
1st Gen. Ram - All Topics
7
09-06-2006 10:23 AM