I was pulling my 47RE valve body to do a transgo kit and failed to see the rod from the valve body going into the overdrive unit. The rod hooks to the shift valve mechanism and came out of the ovedrive when I pulled the valve body. I can't see what it is supposed to hook into in the overdrive when I reinstall the unit. Can anybody help me out with pictures, ideas or....? I have finished most of the kit and would like to reassemble the transmission. Thanks, Charlie H.

 

Never mind. I think it is the parking pawl actuator rod. Just call me dumb but wiser.

 

You might have to raise the rear wheels off the ground and rotate the wheels to get it to slip back in.