changed oil and fuel filter and no start fuel filter is full even tried starting fluid no start got some fuel at side of injectors and little spurting at top of all six what is rong

 

Sounds like you are air bound. Tighten 3 injectors, crank for 15-20 seconds. Loosen them and tighten the other 3, crank some more. Repeat as needed, it should fire in 2 or 3 reps of this unless there is an air leak somewhere.

 

Check and make sure you didn't knock off the wire to the fuel switch when you were changing the fuel filter. It is easy to do!

 

sorry guys found it it was the dam fuel shut off solenoid wire it broke

 

Thats what I was going to tell you to look at!!