lost keyway VP44
#2
Administrator
You have to get the key that is correct for your pump, not sure where on the pump the number is located ( cant remember if it is on the shaft or the body ), but it is critical to have the number on the key match the pump for timing.
Probably going to have to get it from a Bosch pump dealer.
Probably going to have to get it from a Bosch pump dealer.
#3
Registered User
As said above you have to have the right key for the pump. If memory serves the key number is printed on the pump label, and may also be stamped on the pump near the mounting flange.
#4
Registered User
Join Date: Aug 2007
Location: Grand Junction Colorado
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
The key number is stamped on the pump, i mushroomed mine when i installed it, any local bosh dealer should have it they will give you the bs line of it wont work and needs to be recalibrated blah blah blah it works just fine as long as its the same key, 45k miles later and still kicking.
Thread
Thread Starter
Forum
Replies
Last Post
txbubba
24 Valve Engine and Drivetrain
3
08-24-2005 09:07 PM