HELP! If you have an EMERGENCY situation with your truck, or you need IMMEDIATE technical help, use this board.

Help CTD won't start

Old Aug 12, 2007 | 01:20 PM
  #1  
Sam Turner2's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 228
Likes: 0
From: Texas
Help CTD won't start

My 05 CTD won't crank

So the other day i rumped a bunch of rust into my diesle tank, any ways it not has been drained rinsed out, the lift pump screen cleaned, ect, new filter..... It was running good, but sounded diffrent to me and was maybe popping a little under accel;eration, anyways last night i killed it and now it won't start. The only code it shows is teh water code, but teh light isn't on and I have drained it, but it had no water in it. There is fuel pressure to the injector pump as my dummy light comes on when i turn the key and the lift pump comes on. It won't even try to start, no smoke , nothing, it turns over strong also.
Could maybe some starvation have killed my injectro pump? or i stheer a scren somewhere on it that may be clogged? With no service engine light an dno trouble codes other tahn water what canbe wrong? Is theer a kill siwtch that could be frozen?
Can I pull a line off the pump and trun it over to see i fits pumping? if so do i nee dto do any bleeding or priming?
Reply
Old Aug 12, 2007 | 01:29 PM
  #2  
John Faughn's Avatar
Registered User
20 Year Member
 
Joined: Sep 2004
Posts: 2,888
Likes: 1
From: St Paul , MN.
Any undone maintainance 1st [ the rust ] , then test to see if there was damage , fuel pressure test , gauges would be a good mod .
Loosen fuel lines to get a guess at pressure , both after lift pump [ to see that its working ] and if so at injectors to see if main pump is working , but very high pressure at injectors [ can shoot a jet of fuel into flesh ] so be careful with high pressure .
Reply
Old Aug 12, 2007 | 01:30 PM
  #3  
Sam Turner2's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 228
Likes: 0
From: Texas
I have pressure to the einjectro pump, lots o fit, I will chekc teh injectors.
Reply
Old Aug 12, 2007 | 02:05 PM
  #4  
Sam Turner2's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 228
Likes: 0
From: Texas
Update, I went out to pull an injector line and decide to try and crank it, It fired up hestitantly. My fuel pressure dummy light stayed off and about 6 seconds after it carnked it made some kind of rattle sound kinda like maybe iot was the AC clutch kickingin. So i decide to rev it alittle to see if the fule pressure (from lift pump) was low and i reved it to 2000 and the pickup stuck there, it like hovered for 30 seconds after I let loose the trottel before it fell back to idle it bounced from 1800 to 2300. So i reved it again and it did the same but wou;dn't quit so i killed it. the exhaust doesn't quite see like its sounding right though.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
corn binder
HELP!
4
Feb 11, 2011 09:06 PM
ado2b1
HELP!
11
Dec 16, 2008 03:19 PM
Machinos
1st Gen. Ram - All Topics
5
Mar 16, 2008 01:34 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:17 PM.