HELP! If you have an EMERGENCY situation with your truck, or you need IMMEDIATE technical help, use this board.

brake light comes on! loss in pedal travel

Old Jul 25, 2006 | 09:01 PM
  #1  
mr T's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,488
Likes: 0
From: Austin, TX, Toronto, ON
brake light comes on! pedal gets hard to press

i'll drive no problem...come to a light...the brake light comes on...get going again and it goes away...brakes work fine when im on the street...when i get into a parking lot and im reversing/going forward/reversing slowly, the light is on and i cant push the pedal down much it gets all hard...and the truck keeps rollin...rather scary...but driving on the street i can brake to a red light no problem

any suggestions?

ps. fluid level is good and the abs yellow light is NOT on

Last edited by mr T; Jul 26, 2006 at 01:09 AM. Reason: better title
Reply
Old Jul 25, 2006 | 11:40 PM
  #2  
mr T's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,488
Likes: 0
From: Austin, TX, Toronto, ON
oh yeah...i got some sort of leak coming out the power steering pump/vacuum pump...i just finished reading all about the seal replacemetn kits for that seal...would that cause my brake issue when im at a light just holding the brake to keep the truck from moving?

8$ from cummins i believe?
Reply
Old Jul 26, 2006 | 01:58 AM
  #3  
mr T's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,488
Likes: 0
From: Austin, TX, Toronto, ON
k did some more reading...so 2 things...the vacuum assist line running from the vacuum assist pump to under the firewall is a common thing...there's a TSB on it regarding a check valve
http://dodgeram.info/tsb/1997/19-10-97.htm ....read

umm so what does that mean? does that mean that if i dont have acheck valve, dodge will check it and install it and replace my hose? for free?
otherwise what would be the easiest place to get a hoze like that (dont u dare say dealer)

2nd problem is the seal between the steering pump and vacuum pump...that would be 8$ from cummins

??
Reply
Old Jul 26, 2006 | 09:49 AM
  #4  
infidel's Avatar
Registered User
 
Joined: Dec 2003
Posts: 14,672
Likes: 9
From: Montana
A TSB doesn't mean they will do the work for free but on my '95s the check valve was a recall.
Reply
Old Jul 26, 2006 | 10:52 AM
  #5  
mr T's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,488
Likes: 0
From: Austin, TX, Toronto, ON
Originally Posted by infidel
A TSB doesn't mean they will do the work for free but on my '95s the check valve was a recall.

imonna look under there ..if i dont have a check valve the will replace it or give one to me ? but i gotta pay labor or do it myself?

if i do haev a checkvalve already im on my own correct?
Reply
Old Jul 26, 2006 | 01:46 PM
  #6  
mr T's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,488
Likes: 0
From: Austin, TX, Toronto, ON
so i checked out the vacuum brake/booster hose it looks fine...am i supposed to see a crack or something? cause it looks pretty good...anyways i am leaking power steering fluid no engine oil...and the leak is on my gear BOX...right where the nut is for the line that runs from the steering pump...is there a seal for this?..i may have overfilled the fuid in the winter...how can i get some out?

oh and would this power steering fluid leak affect my breaks?
Reply
Old Jul 26, 2006 | 04:04 PM
  #7  
XLR8R's Avatar
Registered User
 
Joined: Nov 2005
Posts: 7,785
Likes: 3
From: Pattonville, Texas
don't you have the hydroboost system on your Ram?
Reply
Old Jul 26, 2006 | 04:07 PM
  #8  
mr T's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,488
Likes: 0
From: Austin, TX, Toronto, ON
Originally Posted by XLR8R
don't you have the hydroboost system on your Ram?

i dont think so i think those started after 96
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hconstantino
3rd Gen Engine and Drivetrain -> 2003-2007
2
May 3, 2010 12:15 PM
Firstgenfanatic
1st Gen. Ram - All Topics
3
Feb 4, 2008 06:15 AM
tmacie
12 Valve Engine and Drivetrain
4
Apr 24, 2006 12:48 PM
pittom
12 Valve Engine and Drivetrain
9
May 2, 2005 08:25 PM
John H
1st Gen. Ram - All Topics
5
Aug 12, 2003 09:16 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:36 PM.