HELP! If you have an EMERGENCY situation with your truck, or you need IMMEDIATE technical help, use this board.

01 broke down won't run. Codes present.

Old Sep 30, 2010 | 06:17 PM
  #1  
Coalfire's Avatar
Thread Starter
Registered User
 
Joined: May 2009
Posts: 13
Likes: 0
01 broke down won't run. Codes present.

Hey guys here is what I got. 01 model 6 speed HO. 110,000 miles on it. Died right off the interstate would not start back. I had to tow it in to a shop today. I have P0123, P01597 and P1693 codes present. Everything I read says TPS switch. Would this keep it from starting? I replaced the lift pump with a Holley Blue about two weeks ago. Had a short case of dead pedal. Thought either bad fuel,filter or lift pump going out so I went ahead and changed it. Lost cruise control after that. Then it came back and then the truck went dead. Thanks.
Reply
Old Oct 1, 2010 | 07:30 AM
  #2  
patdaly's Avatar
Administrator
 
Joined: Jan 2007
Posts: 8,372
Likes: 172
From: Streator Illinois
APPS or VP likely, find the companion codes to your P01693.
Reply
Old Oct 1, 2010 | 11:23 AM
  #3  
wyododge's Avatar
I wish I was as fine, as those who work the pipeline!
 
Joined: Dec 2008
Posts: 1,639
Likes: 0
From: Wyoming
FWIW...

P0123 Accelerator Position Sensor (APPS) Signal Voltage Too High

P1597 Speed Control Switch always low

P1693 Generic fault indicating a fault in the bus or PCM/ECM interface

Did you have the dead peddle before or after the lift pump change?

Do you have a fuel pressure gauge? If so what was it prior to failure off the highway?

Did you loose cruise control right after you replaced the LP? or was it a while after?

If you are sure that you are getting fuel, and if your problems showed up after you replaced you LP, I would check and recheck all the connections for your LP.

As Pat stated, you companion code will help as well.

Also check Here. Lots of good info about your VP and Diagnosing it.
Reply
Old Oct 2, 2010 | 12:02 PM
  #4  
Coalfire's Avatar
Thread Starter
Registered User
 
Joined: May 2009
Posts: 13
Likes: 0
Thanks guys for the replies. Shop says it is the Vp. That sucks. My lift pump is working I have fuel to the injection pump. Gonna crack the lines to see if it has fuel going to them. The shop only did a computer check on the pump and said it was bad.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
pquevill
HELP!
11
Jul 19, 2011 08:18 PM
tanderson2002us
24 Valve Engine and Drivetrain
4
Apr 13, 2009 05:59 PM
mbenedict
HELP!
2
Jul 21, 2007 09:19 PM
bdog
24 Valve Engine and Drivetrain
7
Mar 5, 2003 12:37 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:11 PM.