General Diesel Discussion Talk about general diesel engines (theory, etc.) If it's about diesel, and it doesn't fit anywhere else, then put it right in here.

Most mileage you have seen on a motor?

Thread Tools
 
Search this Thread
 
Old 05-15-2005, 08:11 PM
  #1  
Registered User
Thread Starter
 
Intercooler's Avatar
 
Join Date: May 2005
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
Most mileage you have seen on a motor?

Unopened and original? What is the normal life?
Old 05-15-2005, 09:19 PM
  #2  
Registered User
 
TxDiesel007's Avatar
 
Join Date: Dec 2004
Location: Laredo
Posts: 3,411
Likes: 0
Received 1 Like on 1 Post
Well

i was filling up in a diamond shamrock once, and i saw this beat down dodge, i think it was one of the earliest cummins that came out I heard the old rancher turn in on, and it sounded good.. I made a comment to him, and all he spoke was spanish, he said oh yeah its got about 680,000 miles, daily driven ranch truck, all stock just maintain it... I didnt see the odometer but by lookin at the body i do believe it

An acquaintance of mine has 295K on a 1997 F250 powerstoke 4x4, but it sounds funky at idle, kinda like it lopes...

Another acquaintance of mine has a 12V 1997 cummins ram powered 3500, 2wd, completely stock, with 340,000 miles

I have seen a 1994 powerstoke with 410,000 on the clock, and still runnin,

And i have seen another cummins 24V with 328K and still goin strong, ram 2500

So any diesel will go well, but im stickin with what has been faithfull to me,

12V

it dont mean i dont accept the others tho... but it works for me.. and its paid for..best of luck findin u a truck

Tx
Old 05-15-2005, 09:20 PM
  #3  
Registered User
 
DSjockey's Avatar
 
Join Date: May 2004
Location: Denver Co.
Posts: 270
Likes: 0
Received 0 Likes on 0 Posts
While looking for my truck I saw three trucks that were advertised with over 500K, no mention made of any engine work
Old 05-15-2005, 09:27 PM
  #4  
Registered User
 
pind's Avatar
 
Join Date: Jul 2004
Location: Whitehorse, cultural hub of the universe..
Posts: 1,188
Received 20 Likes on 19 Posts
so far, 93 dodge 3/4 ton 4x4, hotshot truck, in central alberta. 910,000 km with no enigne work. Regular oil changes only.

Approx 570,000 miles. this was in 98

there are several pilot vehicles in this next of the woods pushing close to 400k miles, none with any engine work. Some ( autos ) with tranny jobs, thats it.
Old 05-15-2005, 11:03 PM
  #5  
Registered User
 
4doogie's Avatar
 
Join Date: Dec 2003
Location: north cali
Posts: 402
Likes: 0
Received 0 Likes on 0 Posts
there is a member going around here i think, not 100% sure but 99% that has over a mill. i think he said he moves trailers around the state. i know there are some dodges around with 1,000,000 on them tho. i think one guy got a free truck in trade for his old one with a mill on the clock, made a deal with the dealer.
Old 05-15-2005, 11:06 PM
  #6  
Registered User
 
kandgo's Avatar
 
Join Date: Nov 2003
Posts: 1,075
Likes: 0
Received 0 Likes on 0 Posts
I bought my 91 new and the second owner I sold it to still has it and as the last time I ran into him it is close to 400k and still going and even has the original getrag tranny!! Goodluck,,Rick
Old 05-16-2005, 06:47 AM
  #7  
Registered User
 
Stamey's Avatar
 
Join Date: Jan 2002
Location: Powhatan, Virginia
Posts: 2,730
Received 7 Likes on 6 Posts
A friend of mine has a 91.5 that has had the tranny replaced once and the rear twice, but the engine is still running great, with over 600K on it. You can't tell the milage by the body though, he has taken very good care of it, even using it every day for his landscaping company.
He put some RV275 injectors in it after 600K.

Chris
Old 05-16-2005, 07:36 AM
  #8  
J&L
Registered User
 
J&L's Avatar
 
Join Date: Jan 2004
Posts: 246
Likes: 0
Received 0 Likes on 0 Posts
Check out TDR mag issue #40 page #90-91 on a Mr Tom Olding and his '95 2500 Dodge/Cummins with 1,000,050 miles and figures he can get another 250,000 from the Cummins. He delievered Airstream TTs all over the USA. Engine had never been touched or even had the heads off.
Issue #41 has a Mr Bill Finke with a '96 D/C that turned over 1,000,000 in April of 2001. He was a contract driver for Hoosier RV transportdelivering RVs. In the same article they mention a few other million mile D/Cs. Both drivers had a maintenence log and is interesting to read.
I personally know a hotshoter with a '98 psd 250 with 400,000 mi. The block was determined that it was not rebuildable plus even the injectors would need to be replaced at 3200 dollars. He estimated about 9000 to get the engine back like new so he gave the truck to a grandson. Just the difference in a real medium duty engine and a wanna' be...............JIM
Old 05-16-2005, 08:10 AM
  #9  
Banned
 
59FORD's Avatar
 
Join Date: Feb 2005
Posts: 341
Likes: 0
Received 0 Likes on 0 Posts
Ya justs has to remember..... 99.9% of these have kept those little fingers
OFF the pump!


That rule does not apply here!!!
Old 05-16-2005, 11:21 AM
  #10  
Registered User
 
TxDiesel007's Avatar
 
Join Date: Dec 2004
Location: Laredo
Posts: 3,411
Likes: 0
Received 1 Like on 1 Post
Originally posted by J&L

I personally know a hotshoter with a '98 psd 250 with 400,000 mi. The block was

No offense dude

I think either uve been gyped, or the truck ur talkin bout is a 97... 1998 had no heavy duty fords... Unless its in canada, which i am uncertain about..

Tx
Old 05-16-2005, 01:06 PM
  #11  
Registered User
 
mr T's Avatar
 
Join Date: Mar 2004
Location: Austin, TX, Toronto, ON
Posts: 1,488
Likes: 0
Received 0 Likes on 0 Posts
i dont know any personally only what ive read on here or seen on tachs at the wreckers in the bigger ford trucks that have the 5.9's....one that comes to mind was a tow truck in the autotrader up here a couple months back...12 valve had 765 000kms...never touched the motor was always a tow truck and he was selling it for 10 000$ with the wrecker and all....go figure....they are so underworked in our little trucks
Old 05-16-2005, 01:33 PM
  #12  
Registered User
 
67HotRod's Avatar
 
Join Date: Feb 2005
Location: Gretna, Louisiana
Posts: 1,178
Received 0 Likes on 0 Posts
A friend of mine helped out a buddy who owned a hot shot business out of Houston, TX. Being he was helping the guy out, he was put in the newest company truck (CTD) they had. 96 12v, 650K on the clock!

One truck ran from Houston Tx to Bellechasse La 5 days a week, year round. Started Monday, not shut off till Friday evening. That's pulling a 40ft gn. It supposedly had over 1 million miles on it.

He now owns a 97 12v CTD.

Me: 125k, its not even broke in yet!
Old 05-16-2005, 04:48 PM
  #13  
Registered User
 
96_12V's Avatar
 
Join Date: Feb 2004
Location: Northern Iowa
Posts: 663
Likes: 0
Received 0 Likes on 0 Posts
Every day I work just a bit past 290,000 miles. As I said in my other post, I called on a '95 with 454,000 on it in Ohio last year that was a one-owner with no major work done. That truck sold in three days for the full $5000 price.
Old 05-16-2005, 08:26 PM
  #14  
Registered User
 
hovisimo's Avatar
 
Join Date: Nov 2004
Location: northwestern PA
Posts: 656
Likes: 0
Received 0 Likes on 0 Posts
highest mileage engine we currently have is a 1999 cummins N14 370/435. it had 1.3 million on it when the truck is was in was wrecked. it was pulled, rebuilt, and is currently powering another truck. these engines scream after a rebuild!

the old cummins 290s would roll the odometer twice occasionally, some of them saw over 2 million in the old old old internationals. last 290 we have choked on a fuel pump at 138k, man are those things fun to replace.

you can see why the choice to purchase a mini-cummins was easy
Old 05-16-2005, 11:21 PM
  #15  
Registered User
 
DODGE 92's Avatar
 
Join Date: Apr 2005
Location: NEW BRUNSWICK
Posts: 749
Likes: 0
Received 0 Likes on 0 Posts
i saw a 1st gen in grand falls new brunswick with 1.5 millio km to it the only thing the guy did on it is rod and main bearings as a precaution still id like to get that out of mine


Quick Reply: Most mileage you have seen on a motor?



All times are GMT -5. The time now is 10:25 PM.