Hey guys. I drew up a drawing on the computer of a KDP tab that you could use. I got the dimensions and shape from this website: http://dodgeram.org/tech/dsl/Dowel_Pin/tab.htm<br>I made it to scale but it just doesn't seem big enough. Now maybe I am wrong but I dont know. Here is a picture of it. It should be to scale and if you think its too small by the dimensions or whatever let me know. Also I will be making a few of these. If anyone would like one let me know and I will try to get it out to you. You may have to pay for shipping or something. So let me know if you want one.

 

Heres the pic it didnt attach I guess.

 

Here is a pic of it without the dimensions. Let me know what you guys think. Thanks

 

Oh yeah and by looking at it on your monitor or printing it, it seems to be to scale but I am not sure. Anyway there ya have it.

 

I made my tab using those dimensions. The tab completely covered the dowel pin.

 

I guess my diagram works! Cool. Even though I did take the dimensions from that website, I still drew up a cleaner diagram!

 

Cummins makes a tab washer, think it's around 89¢.
p/n 3958017 Washer,Lock

 

Several diesel performance sources (TST and PDR to name two) are selling KDP tabs. It's a shrinking market with plenty of large competitors, I don't think I'd bother.

 

I just did mine a while back....here's the parts....

Part#
3918673 Gasket,Gear Cover...........$44.06
3804899 Kit,Front Seal Service.......$52.95
3958017 Washer,Lock (KDP Tab)... $1.83
CDN$


Don

 

TST as a complete kit with all you need,gasket,seal,tab,longer bolt,loctite,and instructions for around $55.00

 

I think Cummins in our neck of the woods has a healthy markup..........

 

Here is the tab I made from a HD and still somewhat flexible putty knife blade.

 

Here is the Cummins tab installed.