Gauge Questions
#1
Registered User
Thread Starter
Join Date: Sep 2002
Location: Wyoming
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Gauge Questions
A new guy here with a couple of dumb questions. I would like to add a FP and Exhaust Temp gauge, but I do not feel I can do them myself. Would a Cummins dealer do these installs? Not sure I would want my Dodge dealer trying to do these. Thanks for the help.<br>Hope this is in the correct forum.
#2
Guest
Posts: n/a
Re:Gauge Questions
First of all,if you got any mechanical ability,you can do this,and second if you can read instructions,you can do it.Only thing with egt gauge you have to remove turbo.The fue pressure gauge is perty staight forward installation.Third do it yourself and save some money. ;D
#3
Administrator
Re:Gauge Questions
I feel the same way.
I would feel much better letting someone with experience drilling and tapping into my truck.
I don't have the tools nor the talent nor the patience to attempt it myself.
As far as going to Cummins, you should be able to find someone to do it cheaper then them.
And, if all else fails, there should be members in your area that would be more than happy to help, or watch over your shoulder while you do it. (just supply the beer) ;D
Or find a Bombing party in your neck of the woods to attend.
phox
I would feel much better letting someone with experience drilling and tapping into my truck.
I don't have the tools nor the talent nor the patience to attempt it myself.
As far as going to Cummins, you should be able to find someone to do it cheaper then them.
And, if all else fails, there should be members in your area that would be more than happy to help, or watch over your shoulder while you do it. (just supply the beer) ;D
Or find a Bombing party in your neck of the woods to attend.
phox
#4
Registered User
Re:Gauge Questions
Smokin J:<br>I don't know where you are in Wyoming but we are having a wrench day March 9th in Denver (as long as you don't mind hanging with the Rocky Mountain chapter of the TDR for a day). If you have all the parts I bet we can get them installed. Let me know if you're interested.<br>Barry Gallagher
#5
Registered User
Thread Starter
Join Date: Sep 2002
Location: Wyoming
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Re:Gauge Questions
Hi Barry:<br>Don't think I will be able to make it on the 9th. Thanks for the offer!! If anything changes between now and then I will get in touch with you. The really bad thing about not wanting to try this myself is that 32 yrs ago I was a Huey mechanic in the Army. Was always scared, fix them, and then fly in them!!!!! We had good Tech Inspectors(I believe thats what they were called) who checked everything out though. Thanks again for the offer of help.<br>Smokin J
#7
Registered User
Join Date: Jan 2003
Location: Viola Idaho
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
Re:Gauge Questions
For a boost of confidence that you can do it and instructions on the pyrometer, look here:<br><br>http://www.nwbombers.com/board/ikonb...=ST;f=3;t=2268
Trending Topics
#8
Registered User
Re:Gauge Questions
If you change your mind let me know. If you were a huey mechanic you can do it no problem. The drilling and tapping I had never done before and was scared while doing it but it was a piece of cake.
Thread
Thread Starter
Forum
Replies
Last Post
mtl0727
3rd Gen High Performance and Accessories (5.9L Only)
5
10-12-2005 01:02 PM
Igor
3rd Gen High Performance and Accessories (5.9L Only)
7
09-13-2005 12:47 AM
Greeds22
Performance and Accessories 2nd gen only
25
09-11-2005 03:13 PM
engcogod
Performance and Accessories 2nd gen only
17
02-03-2005 08:49 PM
Patriot_RAM
3rd Gen High Performance and Accessories (5.9L Only)
10
10-08-2004 06:10 PM