99 f350 12v tach problems
#1
99 f350 12v tach problems
trying to get my tach working
I am not going to go to destroke or ford cummins half the fun of doing a conversion is figuring it out
I tied the dodge setup didn't work
so I did the ford setup with the cam sensor take #85 the cam sensor wire and the #48 wire the tach wire and wire them together before pcm
wondering it I might have the sensor to close to the harmonic about .030
I ground in the 2 extra notches so I have 4
I tested wire from sensor to the pcm block I haven't tested the other to the tach yet
I am not going to go to destroke or ford cummins half the fun of doing a conversion is figuring it out
I tied the dodge setup didn't work
so I did the ford setup with the cam sensor take #85 the cam sensor wire and the #48 wire the tach wire and wire them together before pcm
wondering it I might have the sensor to close to the harmonic about .030
I ground in the 2 extra notches so I have 4
I tested wire from sensor to the pcm block I haven't tested the other to the tach yet
Thread
Thread Starter
Forum
Replies
Last Post