Compound Set-up Suggestions? Built 2.8L 4cyl
#1
Compound Set-up Suggestions? Built 2.8L 4cyl
Hello all, I ask your gracious help with the task of turbo sizing suggestions for my 2.8L 4 cylinder motor. (Motor is fully built with a standalone)
I can't rev over 7,500RPM.
Ideally like around 700rwhp (5,500ft elevation) and don't mind running 116octane. This car is a stick shift car. IRS. Slicks. weighs roughly 2,300lbs.
If there is any other key information I should have provided please let me know so I can straighten things out!
I've been told to run an HX35 + HT3B thus far. What are your thoughts, guys?
I can't rev over 7,500RPM.
Ideally like around 700rwhp (5,500ft elevation) and don't mind running 116octane. This car is a stick shift car. IRS. Slicks. weighs roughly 2,300lbs.
If there is any other key information I should have provided please let me know so I can straighten things out!
I've been told to run an HX35 + HT3B thus far. What are your thoughts, guys?
Thread
Thread Starter
Forum
Replies
Last Post
Rednecktastic
Other
10
06-06-2009 12:24 PM
blue-ram
General Diesel Discussion
21
06-08-2006 11:38 PM