Preliminary May Madness dyno results
Preliminary May Madness dyno results
hot off the wire
'03 - 896 hp on a single turbo - drug use unknown
'05 - 849 hp on a single turbo - drug use unknown
CP3 mods and injectors are paying off
more results as I get them
Bart
'03 - 896 hp on a single turbo - drug use unknown
'05 - 849 hp on a single turbo - drug use unknown
CP3 mods and injectors are paying off
more results as I get them
Bart
Originally Posted by Bart Timothy
Not at those numbers.
All I really have to say about those #'s is WOW
and I hope to some day reach them.
Trending Topics
The 893 or 896 ( whatever it was ) had Nitrous, F1 Flux 2 injectors, Floor It Diesel stage 2 pump, TST, BDDL and a single charger.
The truck belongs to Richard ( Reb B ) on the TDR from Cali.
He dynoed in Fresno the day before and got 858 uncorrected, so some mild CF is used, but nothing insane.
Don~
The truck belongs to Richard ( Reb B ) on the TDR from Cali.
He dynoed in Fresno the day before and got 858 uncorrected, so some mild CF is used, but nothing insane.
Don~
Originally Posted by Don M
The 893 or 896 ( whatever it was ) had Nitrous, F1 Flux 2 injectors, Floor It Diesel stage 2 pump, TST, BDDL and a single charger.
The truck belongs to Richard ( Reb B ) on the TDR from Cali.
He dynoed in Fresno the day before and got 858 uncorrected, so some mild CF is used, but nothing insane.
Don~
The truck belongs to Richard ( Reb B ) on the TDR from Cali.
He dynoed in Fresno the day before and got 858 uncorrected, so some mild CF is used, but nothing insane.
Don~
Brett Williams made another run and put down 813. He was having problems.
ATS's Duramax did 888 before the something in the engine blew. It left anifreeze all over the floor.
Brady Williams from II put down 600 even, and Lance Groft (Lightman46) 643. Both these trucks were single turbo, Floor It's stage 2 pump, II injectors, and water meth.
Bully Dog had their Ford there, but I don't know if it ran.
CF for the day was running 8 to 9%.
Wow, some CF was legit for sure then cuz Rebs 03 did 858 the day before at sea level. Well 100 feet of elevation.
896/858 = 4.4%. If it was 8% then some of that CF is fair for sure.
I heard the temps were great. 75 degrees around noon.
Yeah Richard told me about his 06 truck that made the 849. Basically the same mods as the 03, but a different brand of injectors and it was the 325 engine VS the 250.
I watched Richard struggle the first few years with his 12 valves and tons of work. He walked away from MM with a broken heart more than once, but I was thrilled to see him keep it up and step it up this year. Go reb.
Don~
896/858 = 4.4%. If it was 8% then some of that CF is fair for sure.
I heard the temps were great. 75 degrees around noon.
Yeah Richard told me about his 06 truck that made the 849. Basically the same mods as the 03, but a different brand of injectors and it was the 325 engine VS the 250.
I watched Richard struggle the first few years with his 12 valves and tons of work. He walked away from MM with a broken heart more than once, but I was thrilled to see him keep it up and step it up this year. Go reb.
Don~
Originally Posted by Bart Timothy
Actually both the 896 and 849 trucks belonged to Reb B.
Brett Williams made another run and put down 813. He was having problems.
ATS's Duramax did 888 before the something in the engine blew. It left anifreeze all over the floor.
Brady Williams from II put down 600 even, and Lance Groft (Lightman46) 643. Both these trucks were single turbo, Floor It's stage 2 pump, II injectors, and water meth.
Bully Dog had their Ford there, but I don't know if it ran.
CF for the day was running 8 to 9%.
Brett Williams made another run and put down 813. He was having problems.
ATS's Duramax did 888 before the something in the engine blew. It left anifreeze all over the floor.
Brady Williams from II put down 600 even, and Lance Groft (Lightman46) 643. Both these trucks were single turbo, Floor It's stage 2 pump, II injectors, and water meth.
Bully Dog had their Ford there, but I don't know if it ran.
CF for the day was running 8 to 9%.
do you have any clue to what motor is in his 03. i am from fresno and i have seen the truck more than once. it use to have a 24v with p pump conversion and lots done. i talked to his brother Eric from Fresno Performance and he said it had a brand new motor and i forgot to ask him what it was. just curious.
Originally Posted by inline6power
do you have any clue to what motor is in his 03. i am from fresno and i have seen the truck more than once. it use to have a 24v with p pump conversion and lots done. i talked to his brother Eric from Fresno Performance and he said it had a brand new motor and i forgot to ask him what it was. just curious.
Don~
Thread
Thread Starter
Forum
Replies
Last Post
Eddy Reyes
3rd Gen High Performance and Accessories (5.9L Only)
9
Sep 30, 2007 10:25 PM
Bart Timothy
3rd Gen High Performance and Accessories (5.9L Only)
1
May 4, 2006 04:53 AM
MYTRNx3
Natl. and Regional Chapters / Special Events
21
May 7, 2003 09:52 AM




