Competition / Pulls / OffRoad You wanted it, well you got it. The competition and pulling forum. Please have your racing, pulling and other competition posts here. No East Coast vs. West Coast, and no flame wars!

12.71 @ 106 3rd Gen Diesel Only

Old May 27, 2006 | 12:34 AM
  #31  
CButler610's Avatar
Registered User
 
Joined: Nov 2005
Posts: 317
Likes: 0
From: Cape Coral, FL
There is a new unreleased/experimental tune that does indeed eliminate TQ mgmt. It is much more agressive on all settings. Enough to hurt even a modded trans I am told.

This is just an experimental tune from the engineers and given to at least some dealers. I doubt the general public will ever see this. This is what I was told by someone at Bully Dog that actually would know. Too bad.
Reply
Old May 27, 2006 | 09:51 AM
  #32  
OPIE's Avatar
Registered User
 
Joined: Jun 2003
Posts: 297
Likes: 0
From: FEDERAL WAY, WA
Originally Posted by CButler610
There is a new unreleased/experimental tune that does indeed eliminate TQ mgmt. It is much more agressive on all settings. Enough to hurt even a modded trans I am told.

This is just an experimental tune from the engineers and given to at least some dealers. I doubt the general public will ever see this. This is what I was told by someone at Bully Dog that actually would know. Too bad.
If the first part of your reply is true they aren't using the right transmission mods. If the second part is true the general public will see it, but it will just come from another company. I sure am glad that we have more than one company making performance electronics/software for our trucks.
Reply
Old May 27, 2006 | 10:10 AM
  #33  
lit up's Avatar
Registered User
 
Joined: Sep 2004
Posts: 91
Likes: 0
By-passing the speed limiter is easy, just cut the VSS wire (the same wire that you whould splice into for the BD eliminator) and install a switch. It is dark green with a yellow tracer being pin 12 of the ABS module. You can go the BD Power website and download the manual for their eliminator for more info. Hope this helps.
Reply
Old May 29, 2006 | 06:59 PM
  #34  
essgeetee's Avatar
Registered User
 
Joined: Jul 2005
Posts: 227
Likes: 1
From: Arlington, Texas
Thumbs up

This is hot!!! Do you expect these injectors to be a suitable for a daily driver/tower? Also is this a single cab 2wd or what? rock on man!!
Reply
Old May 29, 2006 | 07:12 PM
  #35  
genros's Avatar
Registered User
 
Joined: Jan 2005
Posts: 516
Likes: 0
From: pa
Don M

DOn,

Great times, congrats, What truck are you running?
WHats are the mods? (if not secret of course)
is the truck a daily driver?
more more
Reply
Old May 29, 2006 | 07:59 PM
  #36  
Idaho CTD's Avatar
Registered User
 
Joined: Nov 2002
Posts: 392
Likes: 0
From: Boise, ID
It's my truck and yes I do run the big injectors daily. It is a little touchy running with the BDDL like I usually do but I picked up 126hp the first time I ran these injectors. Right now I should be 500+ or - daily which is a little much for what I like so I might take the BDDL off for every day driving (stock sticks and the BDDL was in the low 400's last time I dynoed it). It has a tendacy to surge on the freeway a little especially if there is any wind.
Reply
Old May 30, 2006 | 06:53 AM
  #37  
genros's Avatar
Registered User
 
Joined: Jan 2005
Posts: 516
Likes: 0
From: pa
what twins are you runnin? any wastegate? would you do anything differently. Are you runnin the Dons Helix 2? (sorry for so many questions)
Reply
Old May 30, 2006 | 11:12 AM
  #38  
Idaho CTD's Avatar
Registered User
 
Joined: Nov 2002
Posts: 392
Likes: 0
From: Boise, ID
Yes on the Helix 2. I run my own twins (stock 600 turbo over a B2) with a Tial 38mm wastegate. If I wasn't trying to see how far I could push this Stage2 cp3 I might go a little smaller on the sticks or pull the BDDL programming. Other than that no I wouldn't change a thing.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
anonymous_1
2nd Gen. Dodge Ram - No Drivetrain
13
Apr 30, 2020 04:29 PM
BRUISER
1st Gen. Ram - All Topics
11
Feb 2, 2015 11:25 AM
1qckdodge
Performance and Accessories 2nd gen only
12
Mar 5, 2007 09:53 AM
Camotanker
3rd Gen Engine and Drivetrain -> 2003-2007
6
May 30, 2006 02:27 PM
mattymac
3rd Gen High Performance and Accessories (5.9L Only)
20
Oct 26, 2004 06:39 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:23 AM.