Dodge Diesel - Diesel Truck Resource Forums

ABDTR #5 Alberta Chapter #5 Discussion

Alberta Nov DYNO/GTG

Thread Tools
 
Search this Thread
 
Old Nov 5, 2007 | 10:20 AM
Share
  #346  
cranked_dodge's Avatar
cranked_dodge
Banned
 
Joined: Jul 2007
Posts: 212
Likes: 0
From: Rimbey AB
Kevin and I will both be there Friday night we should make a time to meet at the Boston Pizza.

Demon can you put one more down for the Dyno I have one of my sponsored trucks coming up to the dyno event as well 04 dodge dually. Thanks

Aaron
Reply
0
Old Nov 5, 2007 | 01:25 PM
Share
  #347  
Lil Dog's Avatar
Lil Dog
Chapter President
 
Joined: Feb 2002
Posts: 6,102
Likes: 2
From: Red Deer, Alberta Canada
Originally Posted by ccmckee
Nope, it was Kevin at PDR here in Calgary a couple years ago, so much for his fancy dynamic method of adjusting timing.
I'm guessing 250 hp on mine with about 650ftlbs.
Same dude that timed the FL60 too wasn't he... Sounds like he needs to get the dial out and read the chart!!! 24° is ridiculous.. Still ran good on the last dyno I saw though.. Little hard on gaskets...
Reply
0
Old Nov 5, 2007 | 01:36 PM
Share
  #348  
Mike Holmen's Avatar
Mike Holmen
The Guru
 
Joined: Jan 2004
Posts: 6,589
Likes: 0
From: Airdrie Canada
I'll try to get up there around supper time. Can someone PM a cell # so we can hook-up that night. I'll try to be civil and keep the chevy bashing down to a minimum.
Reply
0
Old Nov 5, 2007 | 10:21 PM
Share
  #349  
Tate's Avatar
Tate
Registered User
 
Joined: Aug 2005
Posts: 7,780
Likes: 0
From: Airdrie, Alberta
Originally Posted by Lil Dog
Same dude that timed the FL60 too wasn't he... Sounds like he needs to get the dial out and read the chart!!! 24° is ridiculous.. Still ran good on the last dyno I saw though.. Little hard on gaskets...
We know his head gasket is good atleast, lets throw some twins on it!
Reply
0
Old Nov 6, 2007 | 09:20 AM
Share
  #350  
ccmckee's Avatar
ccmckee
Registered User
 
Joined: Apr 2005
Posts: 968
Likes: 1
From: Irricana, Alberta, Canada
Gonna do some other stuff before twins i'm afraid, new rear seal,new starter,new sterring box,new paint job, new valve body to take advantage of the 3k kit.............
Reply
0
Old Nov 6, 2007 | 09:33 AM
Share
  #351  
cranked_dodge's Avatar
cranked_dodge
Banned
 
Joined: Jul 2007
Posts: 212
Likes: 0
From: Rimbey AB
Originally Posted by ccmckee
Gonna do some other stuff before twins i'm afraid, new rear seal,new starter,new sterring box,new paint job, new valve body to take advantage of the 3k kit.............

Let me know when you are ready to go for the valve body and I can get you a good deal on an HTS one.

Aaron
Reply
0
Old Nov 6, 2007 | 09:50 AM
Share
  #352  
Diesel Dave2's Avatar
Diesel Dave2
Pickin on the wrong admin...
 
Joined: Mar 2007
Posts: 3,568
Likes: 1
Originally Posted by cranked_dodge
Let me know when you are ready to go for the valve body and I can get you a good deal on an HTS one.

Aaron

You wouldn't have a used set of 181 DV for sale???
Reply
0
Old Nov 6, 2007 | 10:09 AM
Share
  #353  
ccmckee's Avatar
ccmckee
Registered User
 
Joined: Apr 2005
Posts: 968
Likes: 1
From: Irricana, Alberta, Canada
Thx Arron i have my tranny guy checking into for me right now just to see when i might be able to do it.
Who you asking Dave? mine are still in my truck.
Reply
0
Old Nov 6, 2007 | 10:28 AM
Share
  #354  
cranked_dodge's Avatar
cranked_dodge
Banned
 
Joined: Jul 2007
Posts: 212
Likes: 0
From: Rimbey AB
Originally Posted by Diesel Dave2
You wouldn't have a used set of 181 DV for sale???
No I don't sorry.


Sounds good on the tranny let me know it takes about a week at the most to get that VB in.

Aaron
Reply
0
Old Nov 6, 2007 | 11:34 AM
Share
  #355  
Diesel Dave2's Avatar
Diesel Dave2
Pickin on the wrong admin...
 
Joined: Mar 2007
Posts: 3,568
Likes: 1
Originally Posted by ccmckee
Thx Arron i have my tranny guy checking into for me right now just to see when i might be able to do it.
Who you asking Dave? mine are still in my truck.
Putting the request to everyone...Never know when someone has upgraded to larger DV and have the stock set around.Wouldn't mind ,just to try a set of 181 DV on the dyno.
Reply
0
Old Nov 6, 2007 | 01:43 PM
Share
  #356  
dodgediesel's Avatar
dodgediesel
Registered User
 
Joined: Mar 2005
Posts: 3,190
Likes: 0
From: Red Deer, Alberta
What time are you guys hitting the rollers on Friday??
Reply
0
Old Nov 6, 2007 | 03:33 PM
Share
  #357  
cranked_dodge's Avatar
cranked_dodge
Banned
 
Joined: Jul 2007
Posts: 212
Likes: 0
From: Rimbey AB
Originally Posted by dodgediesel
What time are you guys hitting the rollers on Friday??
I won't be running on the rollers till Saturday and i might not run till later on in the day let other people on before me.

8am it all starts on Saturday though.

Aaron
Reply
0
Old Nov 6, 2007 | 03:39 PM
Share
  #358  
Diesel Dave2's Avatar
Diesel Dave2
Pickin on the wrong admin...
 
Joined: Mar 2007
Posts: 3,568
Likes: 1
How many trucks are we up too??Last count was 25..
Reply
0
Old Nov 6, 2007 | 03:41 PM
Share
  #359  
Tate's Avatar
Tate
Registered User
 
Joined: Aug 2005
Posts: 7,780
Likes: 0
From: Airdrie, Alberta
Two guys from Forestburg want to run as well, so it sounds like its gonna be a big show. Does AFI have an extra bay open there for some tweaking of trucks?

Should we get a roll call of who's gonna be meeting in Crossfield in the morning?
Reply
0
Old Nov 6, 2007 | 04:06 PM
Share
  #360  
Diesel Dave2's Avatar
Diesel Dave2
Pickin on the wrong admin...
 
Joined: Mar 2007
Posts: 3,568
Likes: 1
I'm in Tate....6:30 meet time at timmys??
Reply
0



Advanced Search

All times are GMT -5. The time now is 04:36 PM.