EDGE CTS Monitor and 2012 RAM 6.7 Remote start compatible?
01-24-2013, 03:42 PM
#1
Registered User
Thread Starter
EDGE CTS Monitor and 2012 RAM 6.7 Remote start compatible?
I just installed the Edge Insight CTS on my 2012 2500 lariate 6.7 RAM.
Works Great - powers on when key in ON postion and monitors all the OEM EGTs/Boost/Trans Temp son.
This morning I remote started the truck and noticed when I got in that the CTS did not power on until I unplugged it from the ODBD II port and back and put the key in the ON position.
I hope and suspect it just does not like the RAM remote start on the 2012s, anybody experience this?
Thanks again
Works Great - powers on when key in ON postion and monitors all the OEM EGTs/Boost/Trans Temp son.
This morning I remote started the truck and noticed when I got in that the CTS did not power on until I unplugged it from the ODBD II port and back and put the key in the ON position.
I hope and suspect it just does not like the RAM remote start on the 2012s, anybody experience this?
Thanks again
01-25-2013, 12:43 PM
#2
Registered User
Thread Starter
This appears to have fixed itself, coincidentally it was after I agreed to the message (after it stopped prompting) regarding use of the device. It not starts up even using remote start consistently.. 
Thread
Thread Starter
Forum
Replies
Last Post
ironbrew
3rd Gen High Performance and Accessories (5.9L Only)
1
07-01-2012 09:14 PM
kandgo
3rd Gen High Performance and Accessories (5.9L Only)
3
05-11-2012 10:48 AM
FishBio31
3rd Gen High Performance and Accessories (5.9L Only)
5
11-01-2010 09:30 PM
FishBio31
3rd Gen High Performance and Accessories (5.9L Only)
12
06-17-2010 05:26 PM
FishBio31
3rd Gen High Performance and Accessories (5.9L Only)
0
06-17-2010 01:10 PM