what level should i set my injection timing at?
Thread Starter
Registered User
Joined: Jan 2005
Posts: 41
Likes: 1
From: az
what level should i set my injection timing at?
I just got my mini max for my 2010 . it has 5 levels of injection timing 1 being lowest 3 being default or stock 5 being most aggressive. is it hard on the injectors on 5? or will it build too much egt? or just turn it all the way up and roll
Registered User
Joined: Oct 2010
Posts: 930
Likes: 13
From: Somewhere between Here & There Over the Hill
Unless you have other supporting mods, such as ARP head studs and fuel mods, I would keep it at the default level. That is where I keep mine and when I'm easy on the throttle, I'll squeeze out about 20mpg to/from work (around 70 miles round trip).
Sent from my DROID X2 using Tapatalk 2
Sent from my DROID X2 using Tapatalk 2
Chapter President
Joined: Apr 2007
Posts: 9,375
Likes: 7
From: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
H&S stock tunes are heavy on timing so keep default and I personally would also not go above tow mode. I have MCC on mine and it runs awesome. 40psi boost out of stock turbo. no studs (my tuner is running a S475 @ 50 plus psi boost with no studs and ZERO issues).
Chapter President
Joined: Apr 2007
Posts: 9,375
Likes: 7
From: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
also my custom MCC tune that I am running pulling my 15k toy hauler at 90mph uphill gaining speed, EGT's never got hotter than 1230 degrees.
Thread
Thread Starter
Forum
Replies
Last Post
RollsCoal
Performance and Accessories 2nd gen only
7
Feb 23, 2010 09:23 AM
Common
12 Valve Engine and Drivetrain
7
Jun 20, 2007 07:52 PM
