DPF Delete
#1
Registered User
Thread Starter
Join Date: Feb 2010
Location: Katy, TX; Drilling in Center, TX
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
DPF Delete
Hey guys, I am new to the site and Dodge all together. I have gotten rid of my 06 F-250 for a 2010 3500 Laramie Dually. I am looking to add a DPF delete kit and a programmer. Any specific suggestions or experiences? Any help is appreciated.
Thanks.
Thanks.
#2
Administrator / Severe Concussion Aficionado
I believe the only unit that will work right now is an Edge, check out there sight.
If you hold off a bit, H&S has a programmer they are about to release. Smarty shouldnt be far behind.
Im obviously a fan of the Smarty.
If you hold off a bit, H&S has a programmer they are about to release. Smarty shouldnt be far behind.
Im obviously a fan of the Smarty.
#3
Registered User
Thread Starter
Join Date: Feb 2010
Location: Katy, TX; Drilling in Center, TX
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I just checked out Smarty's site and it loks like nothing available for trucks made after March 4 '09. Guess I'll hold out.
#4
Administrator / Severe Concussion Aficionado
I sent an email to MADS bout 4 days ago and was told they are working on it.
Bob Wagner has made comments on another site that it is approximately 3 weeks out.
Take that at face value.
It is worth the wait however
Bob Wagner has made comments on another site that it is approximately 3 weeks out.
Take that at face value.
It is worth the wait however
#5
Administrator / Severe Concussion Aficionado
Oh and welcome to the site. Lot of good folks on here that are more than willing to help.
Post up some pics of that new rig when you get a chance.
Im working on the Texas Bay Area Pipeline running from Pasadena to Texas City, so Im in your neighborhood.
Post up some pics of that new rig when you get a chance.
Im working on the Texas Bay Area Pipeline running from Pasadena to Texas City, so Im in your neighborhood.
#6
Registered User
Thread Starter
Join Date: Feb 2010
Location: Katy, TX; Drilling in Center, TX
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Appreciate the info. I work on a drilling rig in N. Louisiana and NE Texas (Haynesville Shale area) so we're in somewhat of the same industry.
#7
Chapter President
Nice ride and welcome. MADS is pretty true to the word on release dates, if Bob says 3 weeks, you can hold him to it. (Another MADS Smarty fan!)
Trending Topics
#8
Registered User
Thread Starter
Join Date: Feb 2010
Location: Katy, TX; Drilling in Center, TX
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Can anyone please tell me about how often the exhaust filter cleans itself? I've only got 2K miles on my truck so far, mostly highway. I haven't seen any messages letting me know it has, unless I didn't notice it. From what I understand I will definately know when it's cleaning itself. It's starting to worry me.
#9
you dont get a message on teh 10's. if got 5k miles and i havent even noticed when it regens. Some say the mpg meter will go down when it regens but to be honest, i havent even noticed this. i wouldnt worry about it
#11
If everything is working as designed you basically won't even know it's going on. A truck with a late build date like yours has been pretty trouble free from what I've experienced. Just make sure you keep the ECM updated.
#12
"DTR's Wormiest Member"
Join Date: Jan 2010
Location: Down the road from Blake.
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
i have got about 5k on mine as well and i have never gotten a message. i have noticed that when i am on a trip and have the cruise set if i watch the instantaneous mpg i notice that every now and again the mpg will drop 5 to 6 mpg. this only last for a few miles and then it goes back up.
Thread
Thread Starter
Forum
Replies
Last Post
fishnfreak86
3rd Gen High Performance and Accessories (6.7L Only)
3
06-11-2014 08:44 AM
king cotton
3rd Gen High Performance and Accessories (6.7L Only)
2
11-24-2010 10:33 PM
rip 112
3rd Gen High Performance and Accessories (6.7L Only)
16
01-15-2010 02:46 AM
Red3quarter
3rd Gen Engine and Drivetrain -> 2007 and up
4
11-08-2008 04:11 PM