NEW 18 Runs Rough and rattles at cold start
#1
Registered User
Thread Starter
Join Date: Feb 2015
Location: Lancaster County PA
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
NEW 18 Runs Rough and rattles at cold start
I have a new 2018 with 500 miles on it that I picked up last week, 4/30/18.
I noticed a slight hiccup while driving then things started getting worse.
It was at the Line-X dealer and in side over night Tuesday, when they started it up in the morning it filled the building with smoke and had no power.
Now at a cold start I get smoke, low power and a very loud rattle when accelerating, you might say it sounds like a Ford!
After it warms up (5-10 miles) everything goes away.
This is my third Ram Cummins, I know a diesel will rattle but this is very loud and much more that my 14 ever did.
It has not thrown any codes as of yet. It is at the dealer, they were doing a cold start this morning.
Any suggestions would be helpful.
I noticed a slight hiccup while driving then things started getting worse.
It was at the Line-X dealer and in side over night Tuesday, when they started it up in the morning it filled the building with smoke and had no power.
Now at a cold start I get smoke, low power and a very loud rattle when accelerating, you might say it sounds like a Ford!
After it warms up (5-10 miles) everything goes away.
This is my third Ram Cummins, I know a diesel will rattle but this is very loud and much more that my 14 ever did.
It has not thrown any codes as of yet. It is at the dealer, they were doing a cold start this morning.
Any suggestions would be helpful.
#2
Registered User
If it were me I'd be at the dealer getting it fixed. Could be anything since it's such a new truck. That's what warranties are for. But let us know what the problem was, would be interested to know.
#3
Registered User
Thread Starter
Join Date: Feb 2015
Location: Lancaster County PA
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for all of your responses.
Dealer found that #5 injector was not tight and threw a code.
Checked the other 5 and they were also not tight to specs but to a lesser degree.
Will check Saturday on a cold start to see if all is well.
Dealer found that #5 injector was not tight and threw a code.
Checked the other 5 and they were also not tight to specs but to a lesser degree.
Will check Saturday on a cold start to see if all is well.
Thread
Thread Starter
Forum
Replies
Last Post
High Plains
3rd Gen Engine and Drivetrain -> 2003-2007
6
10-10-2009 11:45 PM
JOECUMNS
3rd Gen High Performance and Accessories (5.9L Only)
1
02-19-2007 02:38 PM