3rd Generation Ram - Non Drivetrain - All Years Talk about the 2003 and up Dodge Ram here. PLEASE, NO ENGINE OR DRIVETRAIN DISCUSSION!.

Visor CD Holder

Old Dec 8, 2003 | 06:23 PM
  #1  
ViperSBT's Avatar
Thread Starter
Chapter President
 
Joined: Sep 2003
Posts: 272
Likes: 0
From: Savannah, TN
Visor CD Holder

Has anyone found a CD holder that fits on the HUGE visors that we have in these trucks? I haven't found one shopping in the usual places. I know I am supposed to put my CDs in the storage compartment, but I got too much other stuff in there.
Reply
Old Dec 8, 2003 | 10:58 PM
  #2  
Crabjoe's Avatar
Registered User
 
Joined: Aug 2003
Posts: 615
Likes: 0
From: Maryland
Re:Visor CD Holder

Let me know when you find one because I've got the same problem as you do.

Reply
Old Dec 8, 2003 | 11:24 PM
  #3  
roan65's Avatar
Registered User
 
Joined: Dec 2003
Posts: 31
Likes: 0
From: Wasilla AK
Re:Visor CD Holder

I'm using one that I bought several years ago. It has storage on both sides of the visor. The only thing is it makes the visor so thick that it doesn't go up all the way. I think It is made by case-logic. Good Luck!
Reply
Old Dec 9, 2003 | 07:42 AM
  #4  
fanofthewolf's Avatar
Registered User
 
Joined: Feb 2003
Posts: 114
Likes: 0
From: Northwest North Carolina
Re:Visor CD Holder

I have one on each side. I thought they were normal size. One I moved from my Dakota, the other is a double that flips down, some friends had it for an Avalon and it did not work for them for some reason. They gave it to me and I put it on the passenger side.
NOTE: You do have to stretch the elastic pretty tight, but mine went on. I'm tall and it does keep the visor from going all the way forward, I just lower the seat all the way down and try to work with it.
Reply
Old Dec 9, 2003 | 06:19 PM
  #5  
rjweiss's Avatar
Registered User
 
Joined: Aug 2003
Posts: 218
Likes: 0
From: Oak Island, NC
Re:Visor CD Holder

Remember the visor pulls out, does a good job of blocking the sun. 8)

Ron W.
Reply
Old Dec 9, 2003 | 10:25 PM
  #6  
bulabula's Avatar
Registered User
 
Joined: Feb 2002
Posts: 2,239
Likes: 0
From: Eastern & Western Merryland
Re:Visor CD Holder

One of the velcro straps on my CD holder was too short for the dodge. It was the inside strap near the rear view mirror.

I don't have a sewing machine nor know anyone that does to add some material, so I ended up using a safety pin on each strap and clipping them together to lengthen it enough to secure it properly.
Reply
Old Dec 10, 2003 | 07:21 AM
  #7  
moterhead's Avatar
Registered User
 
Joined: Oct 2003
Posts: 532
Likes: 0
From: Primm Springs, Tn
Re:Visor CD Holder

You could just get some more velcro of that same size and splice the ends together. Cut pieces however long you need to extend, stick the pieces toghether with some hanging out of each end, then stick the holder pieces to that. But, if the saftety pin works, why mess with it?
Reply
Old Dec 10, 2003 | 08:03 AM
  #8  
bulabula's Avatar
Registered User
 
Joined: Feb 2002
Posts: 2,239
Likes: 0
From: Eastern & Western Merryland
Re:Visor CD Holder

Exactly. The pins I had; I don't have pieces of velcro etc lying around the house. Been up there for so long that I had even forgotten about it til I read this thread.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
turbov6joe
3rd Generation Ram - Non Drivetrain - All Years
15
May 1, 2005 08:02 AM
billyrae
3rd Generation Ram - Non Drivetrain - All Years
4
Apr 12, 2005 10:31 PM
MNorby
2nd Gen. Dodge Ram - No Drivetrain
5
Oct 26, 2004 05:49 PM
adykstra
2nd Gen. Dodge Ram - No Drivetrain
1
Oct 18, 2004 12:32 PM
1sttruck
3rd Generation Ram - Non Drivetrain - All Years
1
Sep 30, 2004 02:35 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:24 PM.