3rd Generation Ram - Non Drivetrain - All Years Talk about the 2003 and up Dodge Ram here. PLEASE, NO ENGINE OR DRIVETRAIN DISCUSSION!.

Starting issues

Thread Tools
 
Search this Thread
 
Old Sep 20, 2017 | 10:21 AM
  #1  
Falcon1's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 632
Likes: 0
From: Graham, Washington
Starting issues

It seems my truck has a mind of it's own, I put the key in and it starts most of the time. Sometimes it starts and shuts off after a couple of seconds. I try to restart an it cranks and cranks no start. I wait a couple of minutes it starts. So I spoke to some people and they thought it may be the chip in the key or the skim reader module. So when I got a no start I would pull the key out and reset it in the ignition and it would start. I took it to the dealer and had the skim module and key replaced, everything was good until yesterday I got a start couple of seconds die, no start, pull the key reinstall it start. Any suggestions?
Reply
Old Oct 16, 2017 | 03:43 PM
  #2  
Ramit65's Avatar
Registered User
 
Joined: Oct 2017
Posts: 4
Likes: 0
From: VA
Sounds like the auto shut down relay... possible ignition switch also. Inline a test light to start relay from switch and check continuity as you cycle the key and try to replicate the issue.
Reply
Old Oct 23, 2017 | 05:34 AM
  #3  
Ramit65's Avatar
Registered User
 
Joined: Oct 2017
Posts: 4
Likes: 0
From: VA
Yo Falcon1.... did you get start/run issue solved.....
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fourthandgoal
12 Valve Engine and Drivetrain
88
Dec 27, 2011 05:39 AM
RED99CTD
24 Valve Engine and Drivetrain
2
Apr 20, 2011 08:08 AM
abc4yew
3rd Gen Engine and Drivetrain -> 2003-2007
3
Mar 15, 2007 11:55 PM
Contractor
HELP!
2
Oct 11, 2005 07:23 AM
FastSS
24 Valve Engine and Drivetrain
12
Oct 11, 2004 02:57 PM




All times are GMT -5. The time now is 08:08 PM.