I need some Help. My stacks raddle the heck out of my overhead display. If I put my hand on it it wont raddle. So, I thought put some rubber or dynamt behind it or isolate it some how I could fix the raddle issue. But how do I take it apart? While I was driving today I didn't see anything obvious.

 

Gently pop off the light covers. There are screws beneath the covers. Pretty straight forward from there.

 

Do I just genlty pry them out with a pick or small straight blade?

 

Small regular screwdriver. Careful of the plastic surfaces and the plastic hinges.

 

there are small indents on the outsides for sliding a screwdriveer into


Chris