3rd Generation Ram - Non Drivetrain - All Years Talk about the 2003 and up Dodge Ram here. PLEASE, NO ENGINE OR DRIVETRAIN DISCUSSION!.

Maintenance

Thread Tools
 
Search this Thread
 
Old Nov 13, 2011 | 10:56 PM
  #1  
mkelly9779's Avatar
Thread Starter
Registered User
 
Joined: Nov 2005
Posts: 69
Likes: 0
Maintenance

I have a little over 100,000 on my truck and would like suggestions for stuff that I need to start looking to change out that should be worn out or could start causing me problems. I just changed all my shocks and the steering stabilizer. I am about to order some replacement sway bar end links because the rubber on them is falling apart. Is there anything else on the front end that I should be looking at.
Reply
Old Nov 15, 2011 | 09:28 PM
  #2  
Det 1's Avatar
Registered User
 
Joined: Sep 2007
Posts: 141
Likes: 1
From: Southeast Iowa
I have over 160k on my truck and in the last two years (about 20k) I've replaced the ball joints and u-joints. Not cheap but much safer and it sure drives a lot better.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RHC
3rd Generation Ram - Non Drivetrain - All Years
12
Mar 25, 2003 06:03 PM
Berak
3rd Generation Ram - Non Drivetrain - All Years
5
Mar 22, 2003 08:03 PM
Bill F
12 Valve Engine and Drivetrain
3
Dec 8, 2002 09:18 AM
pappyman
General Diesel Discussion
2
Nov 24, 2002 09:34 PM
dan239
Other
14
Oct 23, 2002 01:20 PM




All times are GMT -5. The time now is 10:31 AM.