3rd Generation Ram - Non Drivetrain - All Years Talk about the 2003 and up Dodge Ram here. PLEASE, NO ENGINE OR DRIVETRAIN DISCUSSION!.

MAAP Stainless Quad Cab Nerf Step

Thread Tools
 
Search this Thread
 
Old Dec 24, 2002 | 03:51 PM
  #1  
Green Giant's Avatar
Thread Starter
Registered User
 
Joined: Dec 2002
Posts: 59
Likes: 0
From: Southeastern PA
MAAP Stainless Quad Cab Nerf Step

Greetings,<br> These are MAAP (steel Horse) quad cab nerf steps. I wanted a set of stainless Go Rhino steps but they have been on national back order since November so I went with the MAAP bars. Install went well after enlarging one of the mounting holes a wee bit. The steps are actually for a quad 1500 but they bolt up real nice to a 3500 after adjusting that one hole. Thanks Santa.<br>Jeff
Reply
Old Dec 24, 2002 | 03:52 PM
  #2  
Green Giant's Avatar
Thread Starter
Registered User
 
Joined: Dec 2002
Posts: 59
Likes: 0
From: Southeastern PA
Re:MAAP Stainless Quad Cab Nerf Step

1 more close up pic. Enjoy. Jeff
Reply
Old Dec 25, 2002 | 08:14 AM
  #3  
MrBilly's Avatar
Registered User
 
Joined: Oct 2002
Posts: 148
Likes: 0
From: Mid Georgia
Re:MAAP Stainless Quad Cab Nerf Step

Are those the challenger steps which are supposed to be 50% wider? Doesn't seem to look like it, since they had black end caps last time I saw one?<br><br>Bill
Reply
Old Dec 25, 2002 | 09:15 AM
  #4  
UTAH's Avatar
Registered User
 
Joined: Sep 2002
Posts: 258
Likes: 0
From: West Valley, Utah - USA
Re:MAAP Stainless Quad Cab Nerf Step

Those are the regular tube steps - and they look good to me. ;D<br><br>I've got the Challengers on my truck - course, it being a regular cab they aren't as long.<br><br>Check my pics below - go to &quot;See All Of UTAH's Pics&quot; and there's one of my MAAP SS Challenger tube steps.<br><br>Best to y'all<br>Bill
Reply
Old Dec 25, 2002 | 09:52 AM
  #5  
crabman's Avatar
Registered User
 
Joined: Nov 2002
Posts: 238
Likes: 0
Re:MAAP Stainless Quad Cab Nerf Step

I have the Challengers on my quadcab as you can see if you look at Utah's picture they are more like a cross between a running board and a nerf rather than being a standard nerf. Not sure if I said that well. At any rate I dont like running boards but wanted some extra ding protection and they were a good compromise. I like the look and now I dont have to listen to my wife when she climbs in the truck.
Reply
Old Dec 25, 2002 | 02:14 PM
  #6  
Green Giant's Avatar
Thread Starter
Registered User
 
Joined: Dec 2002
Posts: 59
Likes: 0
From: Southeastern PA
Re:MAAP Stainless Quad Cab Nerf Step

Merry Christmas <br> They are the standard 3&quot; stainless steel nerf tubes. A lot more solid than I really expected. I'm happy so far and now I don't have to &quot;jump in&quot; or &quot;fall out&quot; of the truck 8).<br>Jeff
Reply
Old Dec 25, 2002 | 10:03 PM
  #7  
Mopar_Mudder's Avatar
Registered User
 
Joined: Aug 2002
Posts: 1,045
Likes: 0
From: Rice Lake, WI
Re:MAAP Stainless Quad Cab Nerf Step

I have the Challanger ones on order for my quad, but they aren't here yet.
Reply
Old Dec 26, 2002 | 12:40 AM
  #8  
PADZZ's Avatar
Registered User
 
Joined: Sep 2002
Posts: 466
Likes: 0
From: SW Utah
Re:MAAP Stainless Quad Cab Nerf Step

Where'd all y'all get the Challenger (the wide ones)?<br>How much for the quad?
Reply
Old Dec 26, 2002 | 01:32 PM
  #9  
converteddzlr's Avatar
Registered User
 
Joined: Sep 2002
Posts: 317
Likes: 0
From: Edmonton, Alberta
Re:MAAP Stainless Quad Cab Nerf Step

I've got the MAAP's on mine too and the wife loves them! She says that it's easier for her to get into the truck and sit down than it is to get sat down in her '02 Oddysey! And she's 5'4&quot;! For me it's just like going up regular steps!
Reply
Old Dec 26, 2002 | 03:07 PM
  #10  
UTAH's Avatar
Registered User
 
Joined: Sep 2002
Posts: 258
Likes: 0
From: West Valley, Utah - USA
Re:MAAP Stainless Quad Cab Nerf Step

PADZZ - MAAP has dealer listings on their website (just do a search for MAAP).<br><br>Got mine from JCWhitney.com. You need to order the sets for the 2002's though, as they have not yet updated the specs.<br><br>Best to y'all<br>Bill
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TIM RYDEN
3rd Gen High Performance and Accessories (5.9L Only)
1
Apr 25, 2005 10:50 AM
Guy L
Performance and Accessories 2nd gen only
1
Jul 15, 2003 04:06 PM
G-man
Performance and Accessories 2nd gen only
4
Jul 14, 2003 09:20 AM
Berak
Performance and Accessories 2nd gen only
12
Jun 6, 2003 11:58 PM




All times are GMT -5. The time now is 03:52 PM.