First- I have a two wheel drive. I read the manual- no info is a concern to me. Are there supposed to be grease zirks on the tie rod ends? I would like to grease them. While I'm asking how about the u-joints? No zirks there either. If you have them on tie rods, please send me a picture of yours, I have been over every part and can't find anything to grease.

 

Haven't looked at the 03, but there's only 2 on the 2nd gens...

 

Mine only has two, on the bottom of the outer tie rod ends.

They aren't hidden or anything. If you still want a photo, let me know.

 

Don't worry, like you said, you have the 2 wheel drive. The grease fittings are only on the 4X4's
Your front end is completely different

 

The zirk guy was sick the day your truck was built . No joking though, I believe you should have one on each outer tie rob end like everyone else??...maybe.

 

that was what I was worried about that the zirk guy was gone and the truck was built on a zirkless day. I am happy to hear mine may not have them, can I hear from another 2x guy that has checked into it too?

Monte

 

As mentioned above, only the 4 X 4 will have the grease zerks. You can stop looking.

 

My truck is ZERKLESS too. Oh the shame. I will make sure that replacement tie rods have ZERK though. Does anyone use the grease needle injector trick for the ball joints? Or has anyone found a way to install Zerks in them?

Casey