3rd Generation Ram - Non Drivetrain - All Years Talk about the 2003 and up Dodge Ram here. PLEASE, NO ENGINE OR DRIVETRAIN DISCUSSION!.

Front end "clicking" Wheel bearings?

Old Oct 1, 2010 | 11:29 AM
  #1  
Herrin811's Avatar
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 685
Likes: 0
From: Southern IL
Front end "clicking" Wheel bearings?

Recently hearing a clicking noise in the front end....First it was in the front right, now I can hear it on both sides...Very pronounced during turns....Cant hear it in the cab, only when Ive got the windows down....I am guessing its wheel bearings??? 45K on the truck

Any tips or recommendations on packing/replacing them myself?
Reply
Old Oct 1, 2010 | 11:36 AM
  #2  
masterphreak's Avatar
Registered User
 
Joined: Mar 2006
Posts: 218
Likes: 2
From: Columbus, IN
I would check the front axle u-joints. The factory units are sealed and can't be greased.
Reply
Old Oct 1, 2010 | 12:18 PM
  #3  
Blake Clark's Avatar
Administrator / Severe Concussion Aficionado
 
Joined: Jul 2008
Posts: 5,491
Likes: 15
From: Home: Kaplan, LA - Pipelining In: Pecos, Tx
Ditto, sounds like a u-joint to me.
Reply
Old Oct 1, 2010 | 01:09 PM
  #4  
Herrin811's Avatar
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 685
Likes: 0
From: Southern IL
Ok...Gotta go thru the bearing to get to the u-joints....So the bearings will get serviced along the way to checking the u-joints...This shouldnt be too bad but Im a edit magnet....We'll see how it goes...Thanx

Last edited by Blake Clark; Oct 1, 2010 at 01:11 PM. Reason: s/l
Reply
Old Oct 1, 2010 | 03:56 PM
  #5  
masterphreak's Avatar
Registered User
 
Joined: Mar 2006
Posts: 218
Likes: 2
From: Columbus, IN
I'm getting ready to do my axle u-joints and ball joints next weekend. I also have to do shocks all around, back brakes, parking brake cable and drive shaft u-joints. It's gonna be a long weekend.
Reply
Old Oct 1, 2010 | 04:20 PM
  #6  
annabelle's Avatar
Banned
 
Joined: Oct 2006
Posts: 2,613
Likes: 2
From: NM
Originally Posted by Herrin811
Ok...Gotta go thru the bearing to get to the u-joints....So the bearings will get serviced along the way to checking the u-joints...This shouldnt be too bad but Im a edit magnet....We'll see how it goes...Thanx
How will you service the bearings? They the hubs are sealed units. Your sound sounds like the noise my truck made when a front axle U-joint cap had broken. My U-joints took a fire wrench to remove.
Reply
Old Oct 1, 2010 | 10:36 PM
  #7  
jokers's Avatar
Registered User
 
Joined: Apr 2004
Posts: 45
Likes: 0
From: Central New York
I'm hearing a clicking sound also but I'm wondering if a u-joint yoke is having a clearance issue because I've got sloppy ball joints.

Gotta replace the ball joints on both sides so I guess I'll replace the u joints while in in there. Does anyone know what size Spicer joint is appropriate for the axle on my 04'? I'm assuming it is an AAM axle, how can this be verfied?

Hope you don't feel as if I'm hijacking your thread OP, it seems that any info I've requested could also be useful to you.
Reply
Old Oct 2, 2010 | 10:13 PM
  #8  
FBs555CTD's Avatar
Registered User
 
Joined: Apr 2004
Posts: 66
Likes: 0
From: Sherwood, OR
How do you check the U-joint?. I might be in need of some also.
Reply
Old Oct 3, 2010 | 07:22 AM
  #9  
AirGrabber's Avatar
Registered User
 
Joined: Dec 2003
Posts: 389
Likes: 0
Originally Posted by Herrin811
Recently hearing a clicking noise in the front end....First it was in the front right, now I can hear it on both sides...Very pronounced during turns....Cant hear it in the cab, only when Ive got the windows down....I am guessing its wheel bearings??? 45K on the truck

Any tips or recommendations on packing/replacing them myself?
From what your describing, it sounds like one of your sway bar endlinks went south. You can feel the heat in a u-joint thats gone bad or raise up truck and spin the wheels. Shouldnt be hard to see if its a u-joint thats clickin. Dont forget to check the front driveshaft aswell. Also, an 06 and, an 07 that i had both came with the wrong size bolt in the track bar, actually wrong shank size. About drove me nuts till i read about it on here and checked it. Same symptoms aswell.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rob160
3rd Generation Ram - Non Drivetrain - All Years
28
Sep 7, 2022 11:37 AM
silverbullet02
3rd Gen Engine and Drivetrain -> 2003-2007
4
Oct 5, 2009 12:16 PM
Wilbur01
24 Valve Engine and Drivetrain
5
Aug 3, 2009 11:16 PM
jetsnow
12 Valve Engine and Drivetrain
3
Sep 10, 2006 12:09 PM
Dodgezilla
3rd Gen Engine and Drivetrain -> 2003-2007
1
Mar 30, 2005 06:00 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:34 AM.