ripping r

anybody know where i can get one of these?

cbrahs

that was made. i have a couple of friends who have done it. they remove the rams head, get a "C", paint the back ground black and stick the "C" on.

gsbrockman

Did they use the 2003 thru 2005 smaller "C" or the 2006 & up larger "C" ?

Greg

ripping r

ok. i was hoping it was a new emblem. i found some on ebay. but there for 05 and older.

KWKING

You can get them from Geno's if they are the same size as the ones on the front fenders.05 has red paint,06 has black paint Cummins...About $20.00ea.Looks good!

Raspy

Or you could just get one of these.


https://www.dieseltruckresource.com/...5&d=1206294253

cbrahs

looks hot glued to the hood

JJPage

My neck of the woods, some little punk would have that in a flash.

caburnside

You think they used Gorilla Glue

Raspy

I have to tell people all the time that it's "Gorilla Glue" What else could it be?

It's been on there for about 4 years now. Kind of a brave and curious little guy to stand right out there like that.

13MWZ

LOL that's my picture in the original post!

Yea I made that. I removed the original ram head from the grill and pulled the crhome piece off the black backing. Then with an extra cummins fender emblem from my 06 and I cut off the 'turbo diesel' part. Used 3M double sided tape to stick it onto the black backing of the original ram head, then more 3M tape to stick it back on the grill. Been there for a while like that and still tight as could be.