Change Fin Sensor, take dash out??
Thread Starter
Registered User
Joined: Aug 2003
Posts: 218
Likes: 0
From: Oak Island, NC
Change Fin Sensor, take dash out??
My AC has been freezing up the last few years when it's hot and humid, I had the freon pressure checked a few times since then at the dealer and it's always benn fine, so I'm thinking it's the Fin Sensor on the evaporator.
Some people say to just move it but I'm thinking since it did work fine up until a few years ago it probably died.
How hard is it to remove the dash? from what I have heard that is the only way to get to it.....
Is there a write up with pictures??
Ron W.
Some people say to just move it but I'm thinking since it did work fine up until a few years ago it probably died.
How hard is it to remove the dash? from what I have heard that is the only way to get to it.....
Is there a write up with pictures??
Ron W.
Registered User
Joined: Jan 2004
Posts: 3,528
Likes: 16
From: Oregon
I had mine out. Maybe 5 hours work, but I took my time.
This thread may be helpful.
https://www.dieseltruckresource.com/...ved+understood
This thread may be helpful.
https://www.dieseltruckresource.com/...ved+understood
Thread
Thread Starter
Forum
Replies
Last Post
annabelle
3rd Generation Ram - Non Drivetrain - All Years
9
Jun 28, 2010 08:42 AM
thomasg
3rd Generation Ram - Non Drivetrain - All Years
10
Jun 21, 2009 08:55 AM
NoSparkplugs
3rd Generation Ram - Non Drivetrain - All Years
17
May 17, 2009 10:36 PM
snakefarmer
3rd Generation Ram - Non Drivetrain - All Years
1
Aug 13, 2008 04:18 PM
kully560
3rd Generation Ram - Non Drivetrain - All Years
17
Aug 18, 2005 03:14 AM