I just ordered a set and wonder how they mount.

MikeyB

 

Yeah I have them. Mounts easy. Just have to remove the tiny mud shield at back of each fender well. Even though it comes with new screws save the old screws from the mini-shields.
Nat
I'm assuming you came home without them???? and they're on order. Lay them on the ground beside the wheels and you'll see how they mount. Each as their own molded in designation for L and R. If you have a hitch release inside the fender well like I have, you'll have to cut a slot in the new shield to slide over the release lever.

 

Natstayl,
I believe you're thinking of the wheelwell liners.
The fender shields mounts just above the headlamps to protect the leading edge of the fenders.

MikeyB

 

Oh Yeah. Just check'n to see if you're listening.
Nat

 

I have had them installed since last year. Thru a rock right through the passenger side and DC wouldn't replace it. They viewed it as road hazard. So, if you're in a freezing environment just beware that the plastic is very brittle.

 

any pics?

 

TTT

 

William,
I will post some pics after installing them. Hopefully the shields will be in before this weekend.

MikeyB

 

Thanks

 

Check out hoots web site, he has an article on that installation with pictures.
http://home.comcast.net/~hoot74/dodge

rob