I feel like such a tard, I have an 06 4x4 and havn't seen the fittings for the tie rod ends, are they hidden like the front drive shaft? Or am I blind. I did a search but still didn't come to a solid answer for my 06.

 

They are grease-less

 

I have yet to find a single grease point. Anyone know how many there are on an 06 4x4 with all stock components and where they are?

 

I have 3. One on each outer tie rod end, and one on the front driveshaft CV joint that must be greased with a pointed fitting. The tie rod ends are standard zerk type fittings.

 

Ditto for me.

 

same here- noticed when greasing the tie rods last weekend-my driver side one is shot!

 

Thanks for the responce, but why dose the service manual say to lube them at certain intervals? Any idea? Glad to hear I am not loosing it though.

 

I grease tie rods every oil change or there abouts.
Now with the Moogs I have 6 fittings to grease, arg.

 

Can someone tell me from this horrible pic if this is the nipple to grease the outer tie rods?

https://www.dieseltruckresource.com/...d.php?t=151327