So I searched through the forum and couldn't quite find what I was looking for. In the instructions, Isspro recommends mounting the wiring boxes underneath the passenger side of the dash. Now I haven't had time to look yet but is there enough room under there to mount these things there? Whereabouts are you guys mounting them, since Isspro recommends not to mount them under the hood?

Thanks

Luke

 

Best thing is to use zip-ties and tie the boxes to the main wiring harness on the driver side under the dash.

 

I screwed my box into the metal plate that sits under the steering wheel. It's big, and there's a lot of space there. I took that plate off to run all the wiring down there anyway for my isspros...

 

I did what Performance did.

 

I zipped tied the boxes to the main wiring harness under the driver's side.

 

Same here.