TOM R

I need to get stuff out of my cab and my tool box is full, i was thinking about a pair of the over the rail toolboxes that sit on the rail and wheelwell so they stick 6.5" above the rail

my question is does anyone have these and a gooseneck hitch,

i do not use my trailer much but don't want to spend an hour removing boxes and an hour putting them back each time i need the trailer

pind

I would go with porkchop style boxes, that sit on the bed floor, and run up over the wheelwells. I have used them for years. Lower over the rail profile, lots of storage. Bottom access can be a pig, but they are available with sliding drawer access, from opening the tailgate.

http://www.weatherguard.ca/truck_too...p?subcat_id=14

http://www.aztrucks.com/product.asp?Product=378

that second one is a different setup, but might do what you need

TOM R

i do like the porkchops but price is also a big problem, those are $600 over rails are around $170 new

Ramitt

Its cause they are weatherguard(like top of the line truck boxes) You can get those ones for about 200.00.