What injectors to go with?
What injectors to go with?
I was looking at getting some injectors after I do some trans mods and a fuel system. I was looking at anywhere from 90 to 200 hp injectors. Just wondering which ones to look at. And if I get some do you have to get a turbo then also or will the stock one hand for a little while?
Stock injectors are capable of putting out a lot of fuel on their own. Most people go turbo first. Big injectors with stock air = high egts and lots 'o smoke. You will not be able to effectively utilize the extra injector size until you give it more air. This mod thing has to go hand in hand to a degree... How's your tranny??
So far my tanny is good but I know it needs to be upgraded because eventually it is going to give out even though i baby it. As far as the injectors and all go, I am glad I asked because I wasnt sure what to do next or why, I guess I need to start looking into turbos then. There is just so many to choose from and look at. Well once the turbos are done, then the injectors will be good to run?
I know I want the trans done right the 1st time and as for the turbo, I dont want to have to go through 3 or 4 dif ones I want one or maybe 2 that are good for keeping things cooled down. I plan on using the truck to drag, or basically to make rice burners and strokes and dmaxes feel stupid. My goal is 600 to 700 hp.
Trending Topics
OK...
Trans...built to the hilt...from somebody ASAP.
Aurora 5000 if you want a single...
or take your pick Twins...
I would say MPI Twins!
Flux 2's or slightly bigger...
Stage 2 Floor It pump...
You got it!
Trans...built to the hilt...from somebody ASAP.
Aurora 5000 if you want a single...
or take your pick Twins...
I would say MPI Twins!
Flux 2's or slightly bigger...
Stage 2 Floor It pump...
You got it!
Thread
Thread Starter
Forum
Replies
Last Post
darrenG
Performance and Accessories 2nd gen only
8
Jun 21, 2005 10:24 PM




