3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

TS Mp-8, Dr. Performance Predator, Edge EZ, etc.

Thread Tools
 
Search this Thread
 
Old May 8, 2007 | 07:34 PM
  #1  
t-boe's Avatar
Thread Starter
Registered User
 
Joined: Nov 2006
Posts: 2,864
Likes: 1
From: Rock Springs, WY
TS Mp-8, Dr. Performance Predator, Edge EZ, etc.

Need some opinions on all the different pressure boxes. Of course this is used stacked with something else. How does it perform? How are it's manners in regards to rail pressure? Spikes? Smooth increase? Blows injectors? Need all the opinions about every aspect of any pressure box you've ever run.
Reply
Old May 8, 2007 | 07:50 PM
  #2  
$oC@l CTD's Avatar
Banned
 
Joined: Feb 2007
Posts: 854
Likes: 0
From: Manassas, VA
I'm still kinda new to the pressure box on my truck and I don't have a rail pressure gauge, but I can say that it's really smooth power. Take off with things turned up is pretty violent and I wish that I had a built tranny so that I could experience a boosted launch with my stack. Top end is QUICK to pick up...from 65-100 it's just pretty unreal. I mean, I don't have a 12 second truck by any means, but to ME, it's FAST. 0-60 in 5.42 seconds = faster than a Mustang GT and I raced an Acura Integra GTR on the highway (65-100) and did to rice exactly what is meant to happen...I COOKED it! I turn both boxes up (cept for Edge, it goes to 5 rather than 6) and I also get the best mileage that way...all in all, I LOVE it. They just work really well with each other...I can't WAIT to get some better fueling and tranny...it will be track time every other weekend at that point!
Reply
Old May 8, 2007 | 08:01 PM
  #3  
t-boe's Avatar
Thread Starter
Registered User
 
Joined: Nov 2006
Posts: 2,864
Likes: 1
From: Rock Springs, WY
Cool. Who else? Shane I know you have the Mp-8 and a rail gauge. Let's here it.
Reply
Old May 8, 2007 | 08:10 PM
  #4  
Luvnacumns's Avatar
Banned
 
Joined: Dec 2005
Posts: 5,194
Likes: 0
From: Twin Falls, Idaho
Originally Posted by t-boe
Cool. Who else? Shane I know you have the Mp-8 and a rail gauge. Let's here it.
OOOH you seen me learking!! I love it!! In my opinion probably the best pressure chip out there. I haven't had the quad race but the low end grunt in unreal!! It totally woke my truck up and I know it helps spooling the large turbo!! I know Cquestad runs one and loves it too he talked me into it and I don't regret it at all. I will be dynoing May 19 so I will have some numbers but honestly with a stock turbo and stock lift pump, injectors I have not drained my rail once and that was runnning it on 40% and Smarty on #9!! I can get my Fuel pressure down to about four but once the gdp kit goes on it won't be a problem at all. I know wiggs roasted his injectors but after talking to him it was a faulty wiring harness and not the mp-8 total fault. I haven't heard of anything else like that so that was good!

Just my
Reply
Old May 8, 2007 | 08:11 PM
  #5  
Luvnacumns's Avatar
Banned
 
Joined: Dec 2005
Posts: 5,194
Likes: 0
From: Twin Falls, Idaho
The most ive seen on the rail is 23K
Reply
Old May 8, 2007 | 09:01 PM
  #6  
tristan21's Avatar
Registered User
 
Joined: Jan 2006
Posts: 2,191
Likes: 0
From: Marshfield, Missouri
Ive read on hear numerous times that you need a fuel pump with a GOOD filter or you'll kill your injectors with any preassure box. No problems yet on mine but I have the FASS system. Definatly notice the preassure though and with the smarty it is awesome..
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
apocalypse1812
3rd Gen Engine and Drivetrain -> 2007 and up
5
Feb 24, 2010 06:11 PM
realsquash
3rd Gen Engine and Drivetrain -> 2003-2007
22
Nov 2, 2007 03:51 PM
mhuppertz
1st Gen. Ram - All Topics
9
Jun 21, 2007 09:23 PM
turbo dreams
Performance and Accessories 2nd gen only
6
Nov 21, 2005 06:25 PM




All times are GMT -5. The time now is 07:05 AM.