Totally adjustable boost.... How?
Totally adjustable boost.... How?
I'm going to be going with either a larger turbo (Silver62) or ArcticAir compound turbo setup this spring hopefully. Is there a controller/box/programmer where I can adjust boost in cab easily (with a **** or something)??? Don't know if I want to have to adjust at the wastegate with an adjustment nut... I want to keep boost at 40psi initially. I still have stock PLASTIC intercooler. I want to keep egt's down as much as possible, obviously. I will get aftermarket intercooler and studs in the future. Any opinions and options will be appreciated. Thanks...
on the 6280 there is a elbow that comes out of the front of the turbo, in that elbow there is a little allen screw, the more you turn that in the more boost you get. Dont worry you wont be over 40 by much with just the predator. You have to have a lot of fuel to get it into the 50's. When I shut the edge off and just run on the pred I usually hit about 44psi, and that is with the screw turned all the way up
Kevin
Kevin
Thread
Thread Starter
Forum
Replies
Last Post
Hdog
3rd Gen High Performance and Accessories (5.9L Only)
2
Oct 27, 2014 10:52 AM
77machomopar
2nd Gen. Dodge Ram - No Drivetrain
20
Dec 11, 2009 10:37 AM
stutz
3rd Generation Ram - Non Drivetrain - All Years
38
Feb 23, 2005 11:14 AM



