Thuren ultra squishy performance bump stops.....
Thread Starter
Registered User
Joined: Apr 2006
Posts: 5,777
Likes: 0
From: Alta Loma, CA
I can't say 'cause I haven't run the air bumps. But I can say these work extremely well.
These are much, much cheaper than air bumps. But the air bumps are tunable like a shock. I think Baja Mike at Carli's shop is going to run both.
These are much, much cheaper than air bumps. But the air bumps are tunable like a shock. I think Baja Mike at Carli's shop is going to run both.
Thread Starter
Registered User
Joined: Apr 2006
Posts: 5,777
Likes: 0
From: Alta Loma, CA
Registered User
Joined: Dec 2005
Posts: 2,627
Likes: 0
From: DFW, TX
And dumb question, but how much clearance is there between the bottom of the stop and the axle stop pad?
My cheapo superlift bumpstop gives you a whole 1.5" of travel before bottoming out...
Trending Topics
Thread Starter
Registered User
Joined: Apr 2006
Posts: 5,777
Likes: 0
From: Alta Loma, CA
What did they set you back, if you dont mind me asking?(I didnt see them on Don's site yet)
And dumb question, but how much clearance is there between the bottom of the stop and the axle stop pad?
My cheapo superlift bumpstop gives you a whole 1.5" of travel before bottoming out...
And dumb question, but how much clearance is there between the bottom of the stop and the axle stop pad?
My cheapo superlift bumpstop gives you a whole 1.5" of travel before bottoming out...
I think Don is selling them for $125, but I'm not sure. Be sure to ask him for the actual price. I bought them in a package with the leafs and shackles so I really don't know what I paid. They're on Don's site at the bottom of the home page under "Shop News".
I just measured for you and there's 2-1/2" clear at ride height. And my truck only has about 2-1/2" of lift up front. And when you need them they'll compress 2-1/2".
Registered User
Joined: Dec 2005
Posts: 2,627
Likes: 0
From: DFW, TX
I think Don is selling them for $125, but I'm not sure. Be sure to ask him for the actual price. I bought them in a package with the leafs and shackles so I really don't know what I paid. They're on Don's site at the bottom of the home page under "Shop News".
I just measured for you and there's 2-1/2" clear at ride height. And my truck only has about 2-1/2" of lift up front. And when you need them they'll compress 2-1/2".
I just measured for you and there's 2-1/2" clear at ride height. And my truck only has about 2-1/2" of lift up front. And when you need them they'll compress 2-1/2".
Awesome, thanks! I think having my suspension "bottom out" after only an inch and a half of travel is contributing to the already stiff superlift springs, for a pretty cruddy ride
Thread Starter
Registered User
Joined: Apr 2006
Posts: 5,777
Likes: 0
From: Alta Loma, CA
Yeah it is! You can't even tell when Don's bumps are working. When he comes out with a set for the rear I'll be jumping on them also.
Registered User
Joined: Aug 2004
Posts: 1,219
Likes: 0
From: SoCal
'They have to limit the travel with their kit.The spring will bow enough to hit the frame right before the front housing bends.Running that kit at Glamis is an expensive lesson.
Bob
Registered User
Joined: Dec 2005
Posts: 2,627
Likes: 0
From: DFW, TX
Im looking at getting some of Don's coils soon(and shocks if I can swing it), ill get the bumpstops at the same time.
So many toys, so little money
Thread
Thread Starter
Forum
Replies
Last Post
kawi600
Performance and Accessories 2nd gen only
1
Jul 31, 2007 02:08 PM
