I am looking for an auxillary idle controller (after market) to run PTO driven equipment. Any help? Eric

 

I heard the new 600's have a PTO hookup of some sort? Being that the new trucks don't have a cable from the pedal a vaccuum actuated system would have to be put in.

 

A stick works great. And I'm being serious here.

 

There are a couple available for the 3rd gen auto trucks, but not the stick shift models. Don't have the urls right here @ home, but I've posted them before. Try a search about a month ago in this forum. They are built in Canada, and still a little pricey. Since the 3rd gens are fly by wire, the controllers are all electric.

I use the aforementioned stick to help with warm-up etc....

BTW, welcome aboard, and fill out your sig block so we know what you have.

 

Here are the two sources that I've found:

I talked to these guys and was favorably impressed. Price is like $440 Cdn
http://www.dieselservices.com/websto...TOKEN=37010889

http://www.vmac.ca/throttle/index.htm

 

Another one for you by BD Power: http://www.bd-power.com/ram/product....l%20Kit&tt=ram Seperate models for auto or stick shift. Auto model is $457 and stick model is $378.