Its acutally just a link to your "my documents" folder on your computer,, only you can see it. I think I have a membership there Iwill see

Kevin

 

http://www.cumminsforum.com/gallery/...er=473&thumb=1


try that...

 

Got it,, thanks,, now I am spending time over there

Kevin

 

im lookin at puttin mine on that plastic flap on the cup holder....you know the piece riht behind were u put your drinks.....

 

Scott hurry back so we can get you hooked up!!

 

I don't know if you have the console in the roof @ the windshield like the 05's my buddy has 6 switches in the strip in between the 2 lites...using common power and ground...not too much of a mess ...
I have mine on the dash between the cig ltr and the heater fan switch

 

Morkable, do you have the manual 4wd lever or the electric ****? I am putting my switches in the long insert next to the cupholders (piece of sheet metal covered in lightly padded vinyl to match, but if you have a 4wd lever there, it won't work.

 

I have the electric one. I am kinda thinking that maybe I could rework the area where the electric seat switches are..... I dont really need electric seats anymore anyways.

Kevin

 

Hmmm....place a panel of rocker switches like in my '98 in the left side plastic
panel? Now you got my brain working.Now I gotta go out to the garage and see if there's enough clearance to the door panel -- that is stealthy.

 

Fuzzy photography, but here's where I added a few switches...






--Eric

 

Those are nice. What all do they control?

 

Well, actually, nothing yet! I figured as long as I was into the dash work, I would install enough to last me awhile!

I plan on using a switch for some extra fog lights and driving lights...



Two more will be for backup lights and some perimeter bed lights I installed. That leaves me with two extras for whatever may come down the road...

It's a little tricky to find adequate locations for switches without running into interference behind the panels, but I'm pleased with how it's turning out.

--Eric