3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Stock clutch blues!

Old Mar 24, 2009 | 09:09 AM
  #1  
stewee's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 6
Likes: 0
Stock clutch blues!

I heard some folks say that the springs in the junk g56 clutch can be replaced. Does anyone know if this is true? Any help would be great.Just want to put the power to the ground.
Reply
Old Mar 24, 2009 | 07:36 PM
  #2  
shineboy2's Avatar
Registered User
 
Joined: Oct 2006
Posts: 177
Likes: 0
From: Pittsburgh, PA
Just bite the bullet and call Peter @ Southbend.
Reply
Old Mar 24, 2009 | 07:39 PM
  #3  
Danderson's Avatar
Registered User
 
Joined: Jan 2006
Posts: 3,443
Likes: 39
From: San Diego
Yep. Labor's the same. Peter is actually there to talk to. Very patient,friendly man. Don't put any money into/nor replace the stock clutch if you intend to add power.
Reply
Old Mar 24, 2009 | 08:06 PM
  #4  
Midnite Warrior's Avatar
Registered User
 
Joined: Dec 2008
Posts: 46
Likes: 0
From: Plantersville, TX
I would strongly recommend replacing the clutch to a higher quality. Not necessarily the highest priced one either. I took a chance on a lower priced aftermarket clutch and I'm happy with it. It was a little cheaper than a Southbend and some others that are well known. It's your choice but I would not go back with a stock.
Reply
Old Mar 25, 2009 | 10:04 AM
  #5  
stewee's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 6
Likes: 0
Thank you guy's for the help.Southbend here I come.Time to break stuff now!
Reply
Old Mar 25, 2009 | 02:42 PM
  #6  
WYODSL's Avatar
Registered User
 
Joined: Oct 2007
Posts: 249
Likes: 0
Originally Posted by stewee
Thank you guy's for the help.Southbend here I come.Time to break stuff now!
Your calling southbend so you WONT break stuff.
Reply
Old Mar 25, 2009 | 02:59 PM
  #7  
Megadeth's Avatar
Registered User
 
Joined: Jul 2007
Posts: 233
Likes: 0
From: Draper, UT
Originally Posted by stewee
Thank you guy's for the help.Southbend here I come.Time to break stuff now!
Just go straight to a DD.. I wish I did and now I get to buy another clutch in a few months
Reply
Old Mar 25, 2009 | 06:53 PM
  #8  
coblanchard's Avatar
Registered User
 
Joined: May 2008
Posts: 85
Likes: 0
From: Central, MT
I got a SouthBend DD from Lary at the DTR store here. Been very happy with it. Its still a little noisy compared to the stock one, but much quieter and drivable than the other DD that I had.
Reply
Old Mar 25, 2009 | 09:35 PM
  #9  
Fisherguy's Avatar
Registered User
20 Year Member
 
Joined: Feb 2004
Posts: 3,640
Likes: 0
From: Surrey BC Canada (it's not that bad eh!)
Originally Posted by Megadeth
Just go straight to a DD.. I wish I did and now I get to buy another clutch in a few months
I think unless you're going to go to a bigger turbo or something an OFE iss all you need. It's rated for 450 hp but will hold much more than that.

I'm happy with the OFE.
Reply
Old Mar 26, 2009 | 07:30 AM
  #10  
homewrecker's Avatar
Registered User
 
Joined: Nov 2006
Posts: 1,628
Likes: 1
From: N.C.
x2 on the ofe if you don't plan on getting carried away with the mods.Mine is still holding except on the higher Smarty settings.I've got to go to a DD but I'm gonna miss the stock pedal feel and no noise of the ofe.
Reply
Old Mar 26, 2009 | 07:39 AM
  #11  
Fisherguy's Avatar
Registered User
20 Year Member
 
Joined: Feb 2004
Posts: 3,640
Likes: 0
From: Surrey BC Canada (it's not that bad eh!)
I'm curios, how many HP you think you're making with the Smarty on the higher settings?
Slipping on the highway in 6th?
Reply
Old Mar 26, 2009 | 08:08 AM
  #12  
homewrecker's Avatar
Registered User
 
Joined: Nov 2006
Posts: 1,628
Likes: 1
From: N.C.
Slips in 5th and 6th with the Smarty on anything over 5.Been runnign it on 3 for a few months now so I can resale the clutch when I upgrade. Haven't put the truck on the rollers since the latest round of mods.I have flux 2's so theres enough fuel for 700hp with twins,but would guess a very hot 550-600hp with the 62/71/13ss
Reply
Old Mar 26, 2009 | 10:34 AM
  #13  
Fisherguy's Avatar
Registered User
20 Year Member
 
Joined: Feb 2004
Posts: 3,640
Likes: 0
From: Surrey BC Canada (it's not that bad eh!)
Cool, thanks.
I might add an MP8 trying to hit 500 but that will be about it for me.
(I know, famous last words)
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TxDiesel007
Performance and Accessories 2nd gen only
3
Oct 27, 2005 03:30 PM
Rayzor
1st Gen. Ram - All Topics
8
Jul 12, 2003 10:55 PM
cortez
12 Valve Engine and Drivetrain
12
Apr 7, 2003 03:35 PM
jec3
24 Valve Engine and Drivetrain
7
Mar 20, 2003 09:39 AM
BOB
2nd Gen. Dodge Ram - No Drivetrain
10
Dec 14, 2002 07:20 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:00 PM.