what are you fellas seeing stock?

 

30 plus pounds between shifts. Settles down around 28-29. Pretty sweet for a stocker, but it does have a big HX40 sized compressor wheel in it out of the box from Dodge.

 

thank you dodge...the only other thing they have done right besides get a CUMMINS!!

ya..i see a top of 31 psi currently...just hooked the guage up a few mins ago


any idea on what your tranny temp should be at during normal everyday driving?

 

Ummm, not yet. Did not have the time to drop the pan and weld in the bung. The mag-hytek pan will probably be a priority now. I would be guessing at anything on tranny temp.

IN the interim I hooked to the engine oil. Its generally around the 180-200 mark. Running hard it gets to 220-225.


Don~

 

i have a auto.. boost up to 34+..

trans 100 - 110.. had it up to 180's in Big Bend National Park on the Rio Grande River road - chasing Customs Agents that where chasing THose crossing the river

I taped into the 2nd test port on my trans right now..

 

I'm able to peg my 35 psi guage out for like a sec or 2, I agree it is pretty good for a stocker!!

 

The test port does not have fluid on it at all times. The pan will give the best overall reading.

Don~

 

i am running the test port and barely see the guage move...went inbetween 100-180 but nothing even close to anything to have to worry about i guess