I set my truck back to stock today(took out the smarty), and its been so long that I forgot whats the highest boost with stock programming? I can see the wastgate is working but all im seeings is 28-29psi max then the it backs down to 25psi?Does this seem kind of low?
Thanks
Justin

 

How can you see if the wastegate is working? Sounds like its staying open slightly. I think 32 psi is good for stock. (Up to 40 psi with prog/chip)

 

it should spike around 30 and hold steady around 28 if your putting a load against the motor. with a fooler and programmer it spikes around 42 and holds around 38-40.

 

ok good for some reason I thought that it was a little low, thought the lp wasn't working like the filters were clogged.