3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Speed Limiter

Old Nov 25, 2004 | 02:01 PM
  #1  
lit up's Avatar
Thread Starter
Registered User
 
Joined: Sep 2004
Posts: 91
Likes: 0
Speed Limiter

Is there a programmer that will override the speed limiter on 2005?
Reply
Old Nov 26, 2004 | 01:33 AM
  #2  
thejeepdude's Avatar
Registered User
 
Joined: Feb 2004
Posts: 366
Likes: 0
From: Sacramento Area, Kalifornia
The new tuner from quadzilla might... at least it says the duramax version of their stealth tuner does. I would assume the CTD version that's recently been released would have the same features.
Reply
Old Nov 27, 2004 | 12:09 PM
  #3  
lit up's Avatar
Thread Starter
Registered User
 
Joined: Sep 2004
Posts: 91
Likes: 0
They offer nothing for the 2005.
Reply
Old Nov 27, 2004 | 03:41 PM
  #4  
thejeepdude's Avatar
Registered User
 
Joined: Feb 2004
Posts: 366
Likes: 0
From: Sacramento Area, Kalifornia
Originally posted by lit up
They offer nothing for the 2005.
Yet.
Reply
Old Nov 27, 2004 | 09:45 PM
  #5  
Original Junior's Avatar
Chapter President
 
Joined: Oct 2003
Posts: 272
Likes: 0
From: Ft Bragg, NC (originally Philly, Go EAGLES!)
I read on a Hemi website about the ability to override the 108 mph governer on the rams. I believe it goes like this. Start the truck. Wait a few seconds until all the bells, whistles, alarms, etc subside (usual crap upon start up). At this point turn the key back towards the off position one click (it is ever so slightly but you will feel a click). Now the truck will still be running and you'll hear 2 or 3 dings (I can't remember exactly if it's 2 or 3). If you hear the dings you did the procedure correctly. Now leaving the key in that position, you will be able to exceed 110 mph. I have seen this done on my friends hemi and it worked. I tried it on my 04 Cummins and I got the dings after the key trick. Now as for breaking 110 mph. Never tried it and never will. I have a 4.10 rear and I'm not sure it's possible due to rpm's. I was doing 80 on I95 yesterday and was around 2500 rpm's. If you do a search on one of the Hemi sites you should find a video file that shows you how to do it.
Reply
Old Nov 27, 2004 | 10:18 PM
  #6  
PourinDiesel's Avatar
Registered User
 
Joined: Jan 2002
Posts: 5,352
Likes: 0
From: Southern, Indiana
I'll have to try this!
Reply
Old Nov 27, 2004 | 11:36 PM
  #7  
mattymac's Avatar
Registered User
 
Joined: Aug 2004
Posts: 228
Likes: 0
From: sutter CA
It works but you loose alot of your trucks electrical accesories, and if you use it long enough it can set off some codes. Im pretty sure that the alternator quits charging as well. But it does work for "short amounts of time"
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Leon441
3rd Gen High Performance and Accessories (5.9L Only)
13
Mar 26, 2006 10:11 AM
CrashCade
3rd Gen High Performance and Accessories (5.9L Only)
11
Jul 5, 2005 01:32 AM
dieselrob
24 Valve Engine and Drivetrain
13
Apr 9, 2005 10:48 AM
ARAcummins
3rd Gen High Performance and Accessories (5.9L Only)
5
Oct 24, 2004 09:30 PM
Ttexas25
3rd Gen High Performance and Accessories (5.9L Only)
31
Sep 30, 2004 08:48 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:51 PM.