Well this week i am making the move. Off goes the PMT! So I am taking the truck up for a reflash just to be safe then comes the SMARTY! Just want to make sure i can stack the two if not the Mp-8. As well the PMT are going on CLASSIFIEDS! So i will be asking alot on what works the best. Thanks again J,C,

 

The smarty and MP-8 is a very good stack -- they complement one another.

 

im running the smarty and mp-8. works really well. i went 7.7 in the eighth with my SB turbo and 90hp injectors. WITHOUT NITROUS.

 

I Emailed Lary Ellis on a new Smarty and will be ordering it this week! I will keep the Mp-8 and sell the PMT on the classifieds. For as Gauges what do you guys think about running the PMT just for that? Soon as I sell the PMT I will buy Gauges, Would you go overhead or apillar? I feel like a kid in a candy store

 

personally I like the a-pillar and stearing column (I have 5) just easier for me to watch.

 

I ran the outlook for a while before switching to this.

 

So i can run the PMT till i get Gauges. I know i cant load the the PMT just use it as a Gauge. But the Smarty can be loaded right? What is my egts going to be running the 4.4 with a stock turbo? Twins are going on in the spring just cant swing it right now. Thanks again J,C,

 

I am running beta 4.2 with stock turbo (twins in 2-3 weeks) and if I get into it hard my egt can and will get up there, but you can get into it with no problem, I have been over 100 mph and had to get out of it.