Smarty Jr
#1
Smarty Jr
Going to program my new Jr in the morning. What is the best setting for towing a 14000 5er. I live in the North Georgia Mtn's. My truck is a 03 bone stock 6 spd. I just want a safe setting to use. I haven't installed any aftermarket gauges yet so the EGT gives me the *******.
#3
Chapter President
Join Date: Apr 2007
Location: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Posts: 9,375
Likes: 0
Received 6 Likes
on
4 Posts
when in doubt, keep the rpm's up and light on the skinny pedal, this will keep the EGT's down until you get gauges. with a trailer weighing in at 14k plus the truck weight, you are going to be near 21k (truck, trailer, fuel, goodies inside the trailer etc). might even want to run SW1 to be on the safe side until gauges are installed to be able to monitor things.
#5
Wow. What a difference from stock. I set mine on S2 with defaults. I also ordered my pyrometer gauge off of eBay today. One other question when I got in my truck today it seemed liked the fuel pump was taking a long time to kick off is this normal ?
Thread
Thread Starter
Forum
Replies
Last Post
stock03
3rd Gen High Performance and Accessories (5.9L Only)
34
04-21-2011 07:40 AM
RyeThomas
3rd Gen High Performance and Accessories (5.9L Only)
40
04-20-2007 10:12 PM
CTD_Neil
Performance and Accessories 2nd gen only
10
02-23-2006 09:27 PM