3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Smarty on 2003 California SO

Old Sep 10, 2007 | 08:03 PM
  #1  
scott54's Avatar
Thread Starter
Registered User
 
Joined: Apr 2004
Posts: 21
Likes: 0
From: Lincoln, NE
Smarty on 2003 California SO

I figured that I could run Level 7 (130 HP Gain) and be at 365 HP (only 40 HP more than the 04.5 I used to have) without screwing up my 48RE.

Is that logical thinking? Or is there something I am missing?

I searched the site for info and found some talk about "Torque Management". Does the smarty change tranny settings that could cause longevity problems?

I don't want to destroy my tranny, but I want to wake up this sissified California truck.
Reply
Old Sep 10, 2007 | 08:06 PM
  #2  
rustyshakelford's Avatar
Banned
 
Joined: Dec 1969
Posts: 0
Likes: 0
the smarty will get you the same numbers as a HO motor i believe! itll really wake your truck up.

brett
Reply
Old Sep 10, 2007 | 08:38 PM
  #3  
SlowSixSpeed's Avatar
Registered User
 
Joined: Feb 2007
Posts: 625
Likes: 0
From: Placerville, CA
The 130hp will hurt your tranny and will slip over time.

Did your read the literature that came with it?

Keep it on 60hp
Reply
Old Sep 10, 2007 | 08:47 PM
  #4  
gus's 03's Avatar
Banned
 
Joined: Sep 2005
Posts: 758
Likes: 0
From: pacific north wet
slamit on #9, put your foot on the floor and kiss the clutch good by! if your guna killit do it in glory!
Reply
Old Sep 10, 2007 | 08:54 PM
  #5  
scott54's Avatar
Thread Starter
Registered User
 
Joined: Apr 2004
Posts: 21
Likes: 0
From: Lincoln, NE
Originally Posted by SlowSixSpeed
The 130hp will hurt your tranny and will slip over time.

Did your read the literature that came with it?

Keep it on 60hp
Yes, I read it.

Are you saying that the Smarty boosts the stock program which is currently 235 HP, to 325 HP (04.5 levels) and THEN adds the rated HP gain?

Or is it: 235 HP + 60 HP = 295 HP, which is 30 HP less than my 04.5.

This will damage the 48RE? Same transmission in both trucks.
Reply
Old Sep 10, 2007 | 11:03 PM
  #6  
scott54's Avatar
Thread Starter
Registered User
 
Joined: Apr 2004
Posts: 21
Likes: 0
From: Lincoln, NE
Anyone else?
Reply
Old Sep 10, 2007 | 11:20 PM
  #7  
chrleb1's Avatar
Registered User
 
Joined: Nov 2006
Posts: 742
Likes: 0
From: Riverdale, CA
Depends on how you drive it. Most 03 Cali trucks came with the 47RE tranny though. My 03 49 state truck (250 HP) came with a 47RE and 10.5AAM. If it came with an 11.5AAM, then you should have the 48RE tranny.

Anyways, it'll be ok turned up. The TM delete might make it harder though. The 03 trucks have some heavy torque management built in.
Reply
Old Sep 10, 2007 | 11:40 PM
  #8  
soulezoo's Avatar
DTR 1st Sergeant
 
Joined: Apr 2007
Posts: 5,530
Likes: 6
From: Applegate, CA
Somewhere in your Smarty literature or online, Mads states that for SO engines, the power levels listed is for HO engines so your difference will be even more. In others words, 130 HP for HO = 435 HP. 130 HP for 250 HP SO engine =435HP or actual of 185 gain. 130 HP for CA emission 235 HP engine will be 435 HP, or actual gain of 200 HP!
I'm sure if I am mistaken that Bob Wagner will correct me, but I do believe that is the way it is! So--- to answer your question, on stock 48RE it is not recommended you go above say 365 HP or there abouts-- Stay at level 3.
FWIW-- I used to do some ill advised blasting around on level 9 for fun, but always made sure the TC was locked before getting into it.
Reply
Old Sep 11, 2007 | 07:12 AM
  #9  
MikeyB's Avatar
Registered User
 
Joined: Oct 2002
Posts: 7,543
Likes: 4
From: Tomball, Texas
Yep, the SMARTY will bring the SO base line HP up to the HO levels.

MikeyB
Reply
Old Sep 11, 2007 | 08:19 AM
  #10  
rustyshakelford's Avatar
Banned
 
Joined: Dec 1969
Posts: 0
Likes: 0
will my S06 work on my buddies 03? it has the july program in it now

brett
Reply
Old Sep 11, 2007 | 08:43 AM
  #11  
Bob Wagner's Avatar
Registered User
 
Joined: Apr 2002
Posts: 2,321
Likes: 3
From: WA State
Originally Posted by rustyshakelford
will my S06 work on my buddies 03? it has the july program in it now

brett
brett, It depends on which batch of software is installed. 03/06 or 04/07

You can load either group one at a time and the 06 software is the same in either group
Reply
Old Sep 11, 2007 | 08:46 AM
  #12  
rustyshakelford's Avatar
Banned
 
Joined: Dec 1969
Posts: 0
Likes: 0
i gotcha. i always get the one that includes the 07s too. i will download the other one so he can try it.

do you have any idea why it takes between 45-60 mins easily to upload a new version to the smarty?

brett
Reply
Old Sep 11, 2007 | 08:56 AM
  #13  
Bob Wagner's Avatar
Registered User
 
Joined: Apr 2002
Posts: 2,321
Likes: 3
From: WA State
Brett, there is over 440 different files in the software groups.
Reply
Old Sep 11, 2007 | 09:03 AM
  #14  
rustyshakelford's Avatar
Banned
 
Joined: Dec 1969
Posts: 0
Likes: 0
and thats why it takes so long? there is just alot of information? i had asked trevor (t-bone) how long his took and he said 35 mins IIRC. i was just wanting to make sure there wasnt anything wrong with mine...

thanks bob

brett
Reply
Old Sep 11, 2007 | 10:36 AM
  #15  
scott54's Avatar
Thread Starter
Registered User
 
Joined: Apr 2004
Posts: 21
Likes: 0
From: Lincoln, NE
Thanks guys. I couldn't find that info in the manual. I'll turn it down to 3.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
browndg
3rd Gen High Performance and Accessories (5.9L Only)
3
Mar 16, 2011 06:10 PM
haskinr
3rd Gen High Performance and Accessories (5.9L Only)
7
Jul 13, 2005 08:36 PM
Cbfount
3rd Gen Engine and Drivetrain -> 2003-2007
11
Mar 22, 2004 03:26 PM
Edushku
3rd Gen Engine and Drivetrain -> 2003-2007
4
Sep 7, 2003 12:46 PM
shortround
Other
67
Aug 22, 2003 02:50 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:14 AM.